more variables name refactoring

RotaxMonitor/lib/ADS1256/ADS1256.cpp

@@ -11,6 +11,8 @@
  RadoMmm for suggesting an improvement on the ADC-to-Volts conversion
 */
 
+#define DEBUGLOG_DEFAULT_LOG_LEVEL_DEBUG
+
 #include "Arduino.h"
 #include "ADS1256.h"
 #include "SPI.h"
@@ -62,16 +64,18 @@ ADS1256::ADS1256(const int8_t DRDY_pin, const int8_t RESET_pin, const int8_t SYN
 
 	updateConversionParameter();
 
-	// m_drdyHigh = xSemaphoreCreateBinary();
+	m_drdyHigh = xSemaphoreCreateBinary();
-	// m_drdyLow = xSemaphoreCreateBinary();
+	m_drdyLow = xSemaphoreCreateBinary();
-	// if (!m_drdyHigh || !m_drdyLow) {
+	if (!m_drdyHigh || !m_drdyLow)
-	// 	LOG_ERROR("ADC Unable to create interrupt semaphores");
+	{
-	// 	return;
+		LOG_ERROR("ADC Unable to create interrupt semaphores");
-	// }
+		return;
+	}
 
-	// xSemaphoreGive(m_drdyHigh);
+	xSemaphoreGive(m_drdyHigh);
-	// xSemaphoreGive(m_drdyLow);
+	xSemaphoreGive(m_drdyLow);
-	//attachInterruptArg(DRDY_pin, drdyCallback, (void *)this, CHANGE);
+	attachInterruptArg(DRDY_pin, drdyCallback, (void *)this, CHANGE);
+	disableInterrupt(DRDY_pin);
 }
 
 // Initialization
@@ -84,7 +88,7 @@ void ADS1256::InitializeADC()
 	if (m_RESET_pin != PIN_UNUSED)
 	{
 		digitalWrite(m_RESET_pin, LOW);
-		delay(200);
+		delayMicroseconds(500);
 		digitalWrite(m_RESET_pin, HIGH); // RESET is set to high
 		delay(1000);
 	}
@@ -97,44 +101,48 @@ void ADS1256::InitializeADC()
 
 	// Applying arbitrary default values to speed up the starting procedure if the user just want to get quick readouts
 	// We both pass values to the variables and then send those values to the corresponding registers
-	delay(200);
+	delayMicroseconds(500);
 
 	m_STATUS = 0b00110110; // BUFEN and ACAL enabled, Order is MSB, rest is read only
 	writeRegister(STATUS_REG, m_STATUS);
-	delay(200);
+	delayMicroseconds(500);
 
 	m_MUX = DIFF_0_1; // MUX AIN0+AIN1
 	writeRegister(MUX_REG, m_MUX);
-	delay(200);
+	delayMicroseconds(500);
 
 	m_ADCON = WAKEUP; // ADCON - CLK: OFF, SDCS: OFF, PGA = 0 (+/- 5 V)
 	writeRegister(ADCON_REG, m_ADCON);
-	delay(200);
+	delayMicroseconds(500);
 
 	updateConversionParameter();
 
 	m_DRATE = DRATE_100SPS; // 100SPS
 	writeRegister(DRATE_REG, m_DRATE);
-	delay(200);
+	delayMicroseconds(500);
 
 	sendDirectCommand(SELFCAL); // Offset and self-gain calibration
-	delay(200);
+	delayMicroseconds(500);
 
 	m_isAcquisitionRunning = false; // MCU will be waiting to start a continuous acquisition
 }
 
 void ADS1256::waitForLowDRDY()
 {
-	while(digitalRead(m_DRDY_pin) == HIGH) {vTaskDelay(1);};
+	if (!m_isAcquisitionRunning)
-	// xSemaphoreTake(m_drdyLow, pdMS_TO_TICKS(10));
+		while (digitalRead(m_DRDY_pin) == HIGH)
-	// xSemaphoreGive(m_drdyLow);
+			; // wait in loop only for single shot modes
+	xSemaphoreTake(m_drdyLow, pdMS_TO_TICKS(10));
+	xSemaphoreGive(m_drdyLow);
 }
 
 void ADS1256::waitForHighDRDY()
 {
-	while(digitalRead(m_DRDY_pin) == LOW) {vTaskDelay(1);};
+	if (!m_isAcquisitionRunning)
-	// xSemaphoreTake(m_drdyHigh, pdMS_TO_TICKS(10));
+		while (digitalRead(m_DRDY_pin) == LOW)
-	// xSemaphoreGive(m_drdyHigh);
+			; // wait in loop only for single shot modes
+	xSemaphoreTake(m_drdyHigh, pdMS_TO_TICKS(10));
+	xSemaphoreGive(m_drdyHigh);
 }
 
 void ADS1256::stopConversion() // Sending SDATAC to stop the continuous conversion
@@ -145,20 +153,21 @@ void ADS1256::stopConversion() // Sending SDATAC to stop the continuous conversi
 	_spi->endTransaction();
 
 	m_isAcquisitionRunning = false; // Reset to false, so the MCU will be able to start a new conversion
+	disableDRDYinterrupt();
 }
 
 void ADS1256::setDRATE(uint8_t drate) // Setting DRATE (sampling frequency)
 {
 	writeRegister(DRATE_REG, drate);
 	m_DRATE = drate;
-	delay(200);
+	delayMicroseconds(500);
 }
 
 void ADS1256::setMUX(uint8_t mux) // Setting MUX (input channel)
 {
 	writeRegister(MUX_REG, mux);
 	m_MUX = mux;
-	delay(200);
+	delayMicroseconds(500);
 }
 
 void ADS1256::setPGA(uint8_t pga) // Setting PGA (input voltage range)
@@ -169,7 +178,7 @@ void ADS1256::setPGA(uint8_t pga) // Setting PGA (input voltage range)
 	m_ADCON = (m_ADCON & 0b11111000) | (m_PGA & 0b00000111); // Clearing and then setting bits 2-0 based on pga
 
 	writeRegister(ADCON_REG, m_ADCON);
-	delay(200);
+	delayMicroseconds(500);
 
 	updateConversionParameter(); // Update the multiplier according top the new PGA value
 }
@@ -217,7 +226,6 @@ void ADS1256::setCLKOUT(uint8_t clkout) // Setting CLKOUT
 	}
 
 	writeRegister(ADCON_REG, m_ADCON);
-	delay(100);
 }
 
 void ADS1256::setSDCS(uint8_t sdcs) // Setting SDCS
@@ -255,7 +263,6 @@ void ADS1256::setSDCS(uint8_t sdcs) // Setting SDCS
 	}
 
 	writeRegister(ADCON_REG, m_ADCON);
-	delay(100);
 }
 
 void ADS1256::setByteOrder(uint8_t byteOrder) // Setting byte order (MSB/LSB)
@@ -279,7 +286,6 @@ void ADS1256::setByteOrder(uint8_t byteOrder) // Setting byte order (MSB/LSB)
 	}
 
 	writeRegister(STATUS_REG, m_STATUS);
-	delay(100);
 }
 
 uint8_t ADS1256::getByteOrder() // Getting byte order (MSB/LSB)
@@ -310,7 +316,6 @@ void ADS1256::setAutoCal(uint8_t acal) // Setting ACAL (Automatic SYSCAL)
 	}
 
 	writeRegister(STATUS_REG, m_STATUS);
-	delay(100);
 }
 
 uint8_t ADS1256::getAutoCal() // Getting ACAL (Automatic SYSCAL)
@@ -341,7 +346,6 @@ void ADS1256::setBuffer(uint8_t bufen) // Setting input buffer (Input impedance)
 	}
 
 	writeRegister(STATUS_REG, m_STATUS);
-	delay(100);
 }
 
 uint8_t ADS1256::getBuffer() // Getting input buffer (Input impedance)
@@ -405,7 +409,6 @@ void ADS1256::setGPIO(uint8_t dir0, uint8_t dir1, uint8_t dir2, uint8_t dir3) //
 	//-----------------------------------------------------
 
 	writeRegister(IO_REG, m_GPIO);
-	delay(100);
 }
 
 void ADS1256::writeGPIO(uint8_t dir0value, uint8_t dir1value, uint8_t dir2value, uint8_t dir3value) // Writing GPIO
@@ -463,7 +466,6 @@ void ADS1256::writeGPIO(uint8_t dir0value, uint8_t dir1value, uint8_t dir2value,
 	//-----------------------------------------------------
 
 	writeRegister(IO_REG, m_GPIO);
-	delay(100);
 }
 
 uint8_t ADS1256::readGPIO(uint8_t gpioPin) // Reading GPIO
@@ -478,8 +480,6 @@ uint8_t ADS1256::readGPIO(uint8_t gpioPin) // Reading GPIO
 	GPIO_bit1 = bitRead(m_GPIO, 1);
 	GPIO_bit0 = bitRead(m_GPIO, 0);
 
-	delay(100);
-
 	switch (gpioPin) // Selecting which value should be returned
 	{
 	case 0:
@@ -524,45 +524,32 @@ float ADS1256::convertToVoltage(int32_t rawData) // Converting the 24-bit data i
 void ADS1256::writeRegister(uint8_t registerAddress, uint8_t registerValueToWrite)
 {
 	waitForLowDRDY();
+	_spi->beginTransaction(SPISettings(SPI_FREQ, MSBFIRST, SPI_MODE1)); // SPI_MODE1 = output edge: rising, data capture: falling; clock polarity: 0, clock phase: 1.
+	CS_LOW();															// CS must stay LOW during the entire sequence [Ref: P34, T24]
 
-	_spi->beginTransaction(SPISettings(SPI_FREQ, MSBFIRST, SPI_MODE1));
+	delayMicroseconds(5);					// see t6 in the datasheet
-	// SPI_MODE1 = output edge: rising, data capture: falling; clock polarity: 0, clock phase: 1.
-
-	CS_LOW(); // CS must stay LOW during the entire sequence [Ref: P34, T24]
-
-	delayMicroseconds(5); // see t6 in the datasheet
-
 	_spi->transfer(WREG | registerAddress); // 0x50 = 01010000 = WREG
-
+	_spi->transfer(0x00);					// 2nd (empty) command byte
-	_spi->transfer(0x00); // 2nd (empty) command byte
+	_spi->transfer(registerValueToWrite);	// pass the value to the register
-
-	_spi->transfer(registerValueToWrite); // pass the value to the register
 
 	CS_HIGH();
 	_spi->endTransaction();
-	delay(100);
 }
 
 long ADS1256::readRegister(uint8_t registerAddress) // Reading a register
 {
 	waitForLowDRDY();
+	_spi->beginTransaction(SPISettings(SPI_FREQ, MSBFIRST, SPI_MODE1)); // SPI_MODE1 = output edge: rising, data capture: falling; clock polarity: 0, clock phase: 1.
+	CS_LOW();															// CS must stay LOW during the entire sequence [Ref: P34, T24]
 
-	_spi->beginTransaction(SPISettings(SPI_FREQ, MSBFIRST, SPI_MODE1));
+	_spi->transfer(RREG | registerAddress);	 // 0x10 = 0001000 = RREG - OR together the two numbers (command + address)
-	// SPI_MODE1 = output edge: rising, data capture: falling; clock polarity: 0, clock phase: 1.
+	_spi->transfer(0x00);					 // 2nd (empty) command byte
-
+	delayMicroseconds(5);					 // see t6 in the datasheet
-	CS_LOW(); // CS must stay LOW during the entire sequence [Ref: P34, T24]
-
-	_spi->transfer(RREG | registerAddress); // 0x10 = 0001000 = RREG - OR together the two numbers (command + address)
-
-	_spi->transfer(0x00); // 2nd (empty) command byte
-
-	delayMicroseconds(5); // see t6 in the datasheet
-
 	uint8_t regValue = _spi->transfer(0x00); // read out the register value
 
 	CS_HIGH();
 	_spi->endTransaction();
-	delay(100);
+
 	return regValue;
 }
 
@@ -592,6 +579,7 @@ long ADS1256::readSingleContinuous() // Reads the recently selected input channe
 {
 	if (m_isAcquisitionRunning == false)
 	{
+		enableDRDYinterrupt();
 		m_isAcquisitionRunning = true;
 		_spi->beginTransaction(SPISettings(SPI_FREQ, MSBFIRST, SPI_MODE1));
 		CS_LOW(); // REF: P34: "CS must stay low during the entire command sequence"
@@ -620,6 +608,7 @@ long ADS1256::cycleSingle()
 {
 	if (m_isAcquisitionRunning == false)
 	{
+		enableDRDYinterrupt();
 		m_isAcquisitionRunning = true;
 		m_cycle = 0;
 		_spi->beginTransaction(SPISettings(SPI_FREQ, MSBFIRST, SPI_MODE1));
@@ -629,9 +618,6 @@ long ADS1256::cycleSingle()
 		_spi->transfer(SING_0); // AIN0+AINCOM
 		delayMicroseconds(250);
 	}
-	else
-	{
-	}
 
 	if (m_cycle < 8)
 	{
@@ -704,20 +690,16 @@ long ADS1256::cycleDifferential()
 {
 	if (m_isAcquisitionRunning == false)
 	{
+		enableDRDYinterrupt();
 		m_cycle = 0;
 		m_isAcquisitionRunning = true;
 		_spi->beginTransaction(SPISettings(SPI_FREQ, MSBFIRST, SPI_MODE1));
-
-		// Set the AIN0+AIN1 as inputs manually
 		CS_LOW();						// CS must stay LOW during the entire sequence [Ref: P34, T24]
 		_spi->transfer(WREG | MUX_REG); // 0x50 = WREG //1 = MUX
 		_spi->transfer(0x00);
-		_spi->transfer(DIFF_0_1); // AIN0+AIN1
+		_spi->transfer(DIFF_0_1); // Set the AIN0+AIN1 as inputs manually
 		delayMicroseconds(250);
 	}
-	else
-	{
-	}
 
 	if (m_cycle < 4)
 	{
@@ -799,3 +781,35 @@ inline void ADS1256::CS_HIGH()
 		digitalWrite(m_CS_pin, HIGH);
 	}
 }
+
+// functions for callback
+inline uint8_t ADS1256::getDRDYpin()
+{
+	return m_DRDY_pin;
+}
+
+inline SemaphoreHandle_t ADS1256::getDRDYsemaphoreHigh()
+{
+	return m_drdyHigh;
+}
+
+inline SemaphoreHandle_t ADS1256::getDRDYsemaphoreLow()
+{
+	return m_drdyLow;
+}
+
+inline void ADS1256::enableDRDYinterrupt()
+{
+	// release semaphores to avoid deadlock
+	xSemaphoreGive(m_drdyHigh);
+	xSemaphoreGive(m_drdyLow);
+	enableInterrupt(m_DRDY_pin);
+}
+
+inline void ADS1256::disableDRDYinterrupt()
+{
+	// release semaphores to avoid deadlock
+	disableInterrupt(m_DRDY_pin);
+	xSemaphoreGive(m_drdyHigh);
+	xSemaphoreGive(m_drdyLow);
+}

RotaxMonitor/lib/ADS1256/ADS1256.h

@@ -10,8 +10,7 @@
  Benjamin Pelletier for pointing out and fixing an issue around the handling of the DRDY signal
 */
 
-#ifndef _ADS1256_h
+#pragma once
-#define _ADS1256_h
 
 #include <SPI.h>
 #include <Arduino.h>
@@ -159,21 +158,10 @@ public:
 	// Stop AD
 	void stopConversion();
 
-	// functions for callback
+	// functions for callback, public to be accessed by static callback
-	inline uint8_t getDRDYpin()
+	inline uint8_t getDRDYpin();
-	{
+	inline SemaphoreHandle_t getDRDYsemaphoreHigh();
-		return m_DRDY_pin;
+	inline SemaphoreHandle_t getDRDYsemaphoreLow();
-	}
-
-	SemaphoreHandle_t getDRDYsemaphoreHigh()
-	{
-		return m_drdyHigh;
-	}
-
-	SemaphoreHandle_t getDRDYsemaphoreLow()
-	{
-		return m_drdyLow;
-	}
 
 private:
 	SPIClass *_spi; // Pointer to an SPIClass object
@@ -183,6 +171,8 @@ private:
 	void updateMUX(uint8_t muxValue);
 	inline void CS_LOW();
 	inline void CS_HIGH();
+	inline void enableDRDYinterrupt();
+	inline void disableDRDYinterrupt();
 
 	void updateConversionParameter(); // Refresh the conversion parameter based on the PGA
 
@@ -212,4 +202,3 @@ private:
 	SemaphoreHandle_t m_drdyHigh;
 	SemaphoreHandle_t m_drdyLow;
 };
-#endif

RotaxMonitor/platformio.ini

@@ -21,9 +21,9 @@ lib_deps =
 	me-no-dev/AsyncTCP@^3.3.2
 	me-no-dev/ESPAsyncWebServer@^3.6.0
 upload_protocol = esptool
-upload_port = /dev/ttyACM1
+upload_port = /dev/ttyACM0
 upload_speed = 921600
-monitor_port = /dev/ttyACM0
+monitor_port = /dev/ttyACM1
 monitor_speed = 921600
 build_type = release
 build_flags = 
@@ -35,6 +35,7 @@ build_flags =
 	-DCONFIG_ASYNC_TCP_QUEUE_SIZE=64
 	-DCONFIG_ASYNC_TCP_RUNNING_CORE=1
 	-DCONFIG_ASYNC_TCP_STACK_SIZE=4096
+	-fstack-protector-strong
 
 [env:esp32-s3-devkitc1-n16r8-debug]
 board = ${env:esp32-s3-devkitc1-n16r8.board}
@@ -45,9 +46,9 @@ framework = ${env:esp32-s3-devkitc1-n16r8.framework}
 lib_deps = 
 	${env:esp32-s3-devkitc1-n16r8.lib_deps}
 upload_protocol = esptool
-upload_port = /dev/ttyACM1
+upload_port = /dev/ttyACM0
 upload_speed = 921600
-monitor_port = /dev/ttyACM0
+monitor_port = /dev/ttyACM1
 monitor_speed = 921600
 debug_tool = esp-builtin
 debug_speed = 15000

RotaxMonitor/src/datasave.cpp

@@ -48,28 +48,28 @@ void ignitionBoxStatusFiltered::update(const ignitionBoxStatus &new_status)
     m_count++;
     // simple moving average calculation
     m_last.timestamp = new_status.timestamp;                                         // keep timestamp of latest status
-    m_last.coils12.n_events = new_status.coils12.n_events;                           // sum events instead of averaging
+    m_last.coils12.nEvents = new_status.coils12.nEvents;                           // sum events instead of averaging
-    m_last.coils12.n_missed_firing = new_status.coils12.n_missed_firing;             // sum missed firings instead of averaging
+    m_last.coils12.nMissedFiring = new_status.coils12.nMissedFiring;             // sum missed firings instead of averaging
-    m_last.coils12.spark_status = new_status.coils12.spark_status;                   // take latest spark status
+    m_last.coils12.sparkStatus = new_status.coils12.sparkStatus;                   // take latest spark status
-    m_last.coils12.sstart_status = new_status.coils12.sstart_status;                 // take latest soft start status
+    m_last.coils12.softStartStatus = new_status.coils12.softStartStatus;                 // take latest soft start status
-    filter(m_last.coils12.spark_delay, new_status.coils12.spark_delay, m_max_count); // incremental average calculation
+    filter(m_last.coils12.sparkDelay, new_status.coils12.sparkDelay, m_max_count); // incremental average calculation
-    filter(m_last.coils12.peak_p_in, new_status.coils12.peak_p_in, m_max_count);     // incremental average calculation
+    filter(m_last.coils12.peakPos, new_status.coils12.peakPos, m_max_count);     // incremental average calculation
-    filter(m_last.coils12.peak_n_in, new_status.coils12.peak_n_in, m_max_count);     // incremental average calculation
+    filter(m_last.coils12.peakNeg, new_status.coils12.peakNeg, m_max_count);     // incremental average calculation
-    filter(m_last.coils12.peak_p_out, new_status.coils12.peak_p_out, m_max_count);   // incremental average calculation
+    filter(m_last.coils12.trigLevelPos, new_status.coils12.trigLevelPos, m_max_count);   // incremental average calculation
-    filter(m_last.coils12.peak_n_out, new_status.coils12.peak_n_out, m_max_count);   // incremental average calculation
+    filter(m_last.coils12.trigLevelNeg, new_status.coils12.trigLevelNeg, m_max_count);   // incremental average calculation
 
-    m_last.coils34.n_events = new_status.coils34.n_events;                           // sum events instead of averaging
+    m_last.coils34.nEvents = new_status.coils34.nEvents;                           // sum events instead of averaging
-    m_last.coils34.n_missed_firing = new_status.coils34.n_missed_firing;             // sum missed firings instead of averaging
+    m_last.coils34.nMissedFiring = new_status.coils34.nMissedFiring;             // sum missed firings instead of averaging
-    m_last.coils34.spark_status = new_status.coils34.spark_status;                   // take latest spark status
+    m_last.coils34.sparkStatus = new_status.coils34.sparkStatus;                   // take latest spark status
-    m_last.coils34.sstart_status = new_status.coils34.sstart_status;                 // take latest soft start status
+    m_last.coils34.softStartStatus = new_status.coils34.softStartStatus;                 // take latest soft start status
-    filter(m_last.coils34.spark_delay, new_status.coils34.spark_delay, m_max_count); // incremental average calculation
+    filter(m_last.coils34.sparkDelay, new_status.coils34.sparkDelay, m_max_count); // incremental average calculation
-    filter(m_last.coils34.peak_p_in, new_status.coils34.peak_p_in, m_max_count);     // incremental average calculation
+    filter(m_last.coils34.peakPos, new_status.coils34.peakPos, m_max_count);     // incremental average calculation
-    filter(m_last.coils34.peak_n_in, new_status.coils34.peak_n_in, m_max_count);     // incremental average calculation
+    filter(m_last.coils34.peakNeg, new_status.coils34.peakNeg, m_max_count);     // incremental average calculation
-    filter(m_last.coils34.peak_p_out, new_status.coils34.peak_p_out, m_max_count);   // incremental average calculation
+    filter(m_last.coils34.trigLevelPos, new_status.coils34.trigLevelPos, m_max_count);   // incremental average calculation
-    filter(m_last.coils34.peak_n_out, new_status.coils34.peak_n_out, m_max_count);   // incremental average calculation
+    filter(m_last.coils34.trigLevelNeg, new_status.coils34.trigLevelNeg, m_max_count);   // incremental average calculation
-    filter(m_last.eng_rpm, new_status.eng_rpm, m_max_count);                         // incremental average calculation                   // incremental average calculation
+    filter(m_last.engRpm, new_status.engRpm, m_max_count);                         // incremental average calculation                   // incremental average calculation
-    filter(m_last.adc_read_time, m_last.adc_read_time, m_max_count);                 // incremental average calculation
+    filter(m_last.adcReadTime, m_last.adcReadTime, m_max_count);                 // incremental average calculation
-    m_last.n_queue_errors = new_status.n_queue_errors;
+    m_last.nQueueErrors = new_status.nQueueErrors;
 
     if (m_count >= m_max_count)
     {
@@ -95,29 +95,29 @@ const ArduinoJson::JsonDocument ignitionBoxStatusFiltered::toJson() const
         doc["timestamp"] = m_last.timestamp;
         doc["datavalid"] = m_data_valid ? "TRUE" : "FALSE";
 
-        doc["coils12"]["n_events"] = m_last.coils12.n_events;
+        doc["coils12"]["nEvents"] = m_last.coils12.nEvents;
-        doc["coils12"]["n_missed_firing"] = m_last.coils12.n_missed_firing;
+        doc["coils12"]["nMissedFiring"] = m_last.coils12.nMissedFiring;
-        doc["coils12"]["spark_delay"] = m_last.coils12.spark_delay;
+        doc["coils12"]["sparkDelay"] = m_last.coils12.sparkDelay;
-        doc["coils12"]["spark_status"] = sparkStatusNames.at(m_last.coils12.spark_status);
+        doc["coils12"]["sparkStatus"] = sparkStatusNames.at(m_last.coils12.sparkStatus);
-        doc["coils12"]["peak_p_in"] = m_last.coils12.peak_p_in;
+        doc["coils12"]["peakPos"] = m_last.coils12.peakPos;
-        doc["coils12"]["peak_n_in"] = m_last.coils12.peak_n_in;
+        doc["coils12"]["peakNeg"] = m_last.coils12.peakNeg;
-        doc["coils12"]["peak_p_out"] = m_last.coils12.peak_p_out;
+        doc["coils12"]["trigLevelPos"] = m_last.coils12.trigLevelPos;
-        doc["coils12"]["peak_n_out"] = m_last.coils12.peak_n_out;
+        doc["coils12"]["trigLevelNeg"] = m_last.coils12.trigLevelNeg;
-        doc["coils12"]["sstart_status"] = softStartStatusNames.at(m_last.coils12.sstart_status);
+        doc["coils12"]["softStartStatus"] = softStartStatusNames.at(m_last.coils12.softStartStatus);
 
-        doc["coils34"]["n_events"] = m_last.coils34.n_events;
+        doc["coils34"]["nEvents"] = m_last.coils34.nEvents;
-        doc["coils34"]["n_missed_firing"] = m_last.coils34.n_missed_firing;
+        doc["coils34"]["nMissedFiring"] = m_last.coils34.nMissedFiring;
-        doc["coils34"]["spark_delay"] = m_last.coils34.spark_delay;
+        doc["coils34"]["sparkDelay"] = m_last.coils34.sparkDelay;
-        doc["coils34"]["spark_status"] = sparkStatusNames.at(m_last.coils34.spark_status);
+        doc["coils34"]["sparkStatus"] = sparkStatusNames.at(m_last.coils34.sparkStatus);
-        doc["coils34"]["peak_p_in"] = m_last.coils34.peak_p_in;
+        doc["coils34"]["peakPos"] = m_last.coils34.peakPos;
-        doc["coils34"]["peak_n_in"] = m_last.coils34.peak_n_in;
+        doc["coils34"]["peakNeg"] = m_last.coils34.peakNeg;
-        doc["coils34"]["peak_p_out"] = m_last.coils34.peak_p_out;
+        doc["coils34"]["trigLevelPos"] = m_last.coils34.trigLevelPos;
-        doc["coils34"]["peak_n_out"] = m_last.coils34.peak_n_out;
+        doc["coils34"]["trigLevelNeg"] = m_last.coils34.trigLevelNeg;
-        doc["coils34"]["sstart_status"] = softStartStatusNames.at(m_last.coils34.sstart_status);
+        doc["coils34"]["softStartStatus"] = softStartStatusNames.at(m_last.coils34.softStartStatus);
 
-        doc["eng_rpm"] = m_last.eng_rpm;
+        doc["engRpm"] = m_last.engRpm;
-        doc["adc_read_time"] = m_last.adc_read_time;
+        doc["adcReadTime"] = m_last.adcReadTime;
-        doc["n_queue_errors"] = m_last.n_queue_errors;
+        doc["nQueueErrors"] = m_last.nQueueErrors;
     }
     return doc;
 }

RotaxMonitor/src/datastruct.h

@@ -16,7 +16,7 @@ static const uint32_t SPARK_FLAG_12 = (1 << 9);
 static const uint32_t SPARK_FLAG_34 = (1 << 10);
 
 // Spark Status
-enum sparkStatus
+enum sparkStatusEnum
 {
     SPARK_POS_OK,
     SPARK_NEG_OK,
@@ -31,7 +31,7 @@ enum sparkStatus
     SPARK_SYNC_FAIL,
 };
 
-static const std::map<const sparkStatus, const char *> sparkStatusNames = {
+static const std::map<const sparkStatusEnum, const char *> sparkStatusNames = {
     {SPARK_POS_OK, "SPARK_POS_OK"},
     {SPARK_NEG_OK, "SPARK_NEG_OK"},
     {SPARK_POS_SKIP, "SPARK_POS_SKIP"},
@@ -45,14 +45,14 @@ static const std::map<const sparkStatus, const char *> sparkStatusNames = {
     {SPARK_SYNC_FAIL, "SPARK_SYNC_FAIL"},
 };
 
-enum softStartStatus
+enum softStartStatusEnum
 {
     NORMAL,
     SOFT_START,
     ERROR,
 };
 
-const std::map<const softStartStatus, const char *> softStartStatusNames = {
+const std::map<const softStartStatusEnum, const char *> softStartStatusNames = {
     {NORMAL, "NORMAL"},
     {SOFT_START, "SOFT_START"},
     {ERROR, "ERROR"},
@@ -60,18 +60,17 @@ const std::map<const softStartStatus, const char *> softStartStatusNames = {
 
 struct coilsStatus
 {
-    int64_t trig_time = 0;
+    int64_t coilTime = 0;
-    int64_t spark_time = 0;
+    int64_t sparkTime = 0;
-    int32_t spark_delay = 0; // in microseconds
+    int32_t sparkDelay = 0; // in microseconds
-    sparkStatus spark_status = sparkStatus::SPARK_POS_OK;
+    sparkStatusEnum sparkStatus = sparkStatusEnum::SPARK_POS_OK;
-    softStartStatus sstart_status = softStartStatus::NORMAL;
+    softStartStatusEnum softStartStatus = softStartStatusEnum::NORMAL;
-    float peak_p_in = 0.0;
+    float peakPos = 0.0;
-    float peak_n_in = 0.0;
+    float peakNeg = 0.0;
-    float peak_p_out = 0.0;
+    float trigLevelPos = 0.0;
-    float peak_n_out = 0.0;
+    float trigLevelNeg = 0.0;
-    float level_spark = 0.0;
+    uint32_t nEvents = 0;
-    uint32_t n_events = 0;
+    uint32_t nMissedFiring = 0;
-    uint32_t n_missed_firing = 0;
 };
 
 // Task internal Status
@@ -81,13 +80,12 @@ struct ignitionBoxStatus
     // coils pairs for each ignition
     coilsStatus coils12;
     coilsStatus coils34;
-    // voltage from generator
-    float volts_gen = 0.0;
     // enine rpm
-    int32_t eng_rpm = 0;
+    int32_t engRpm = 0;
     // debug values
-    uint32_t n_queue_errors = 0;
+    uint32_t nQueueErrors = 0;
-    int32_t adc_read_time = 0;
+    int32_t adcReadTime = 0;
+    int32_t ioReadWriteTime = 0;
 };
 
 

RotaxMonitor/src/isr.cpp

@@ -26,22 +26,22 @@ void trig_isr_A(void *arg)
     case TRIG_FLAG_12P:
     case TRIG_FLAG_12N:
         // only on first trigger to avoid multiple firing due to noise, to be fixed with hardware debounce
-        box->coils12.trig_time = time_us;
+        box->coils12.coilTime = time_us;
         xTaskNotifyFromISR(task_handle, params->flag, eSetValueWithOverwrite, &xHigherPriorityTaskWoken);
         break;
     case TRIG_FLAG_34P:
     case TRIG_FLAG_34N:
         // only on first trigger to avoid multiple firing due to noise, to be fixed with hardware debounce
-        box->coils34.trig_time = time_us;
+        box->coils34.coilTime = time_us;
         xTaskNotifyFromISR(task_handle, params->flag, eSetValueWithOverwrite, &xHigherPriorityTaskWoken);
         break;
     case SPARK_FLAG_12:
 
-        box->coils12.spark_time = time_us;
+        box->coils12.sparkTime = time_us;
         xTaskNotifyFromISR(task_handle, params->flag, eSetValueWithOverwrite, &xHigherPriorityTaskWoken);
         break;
     case SPARK_FLAG_34:
-        box->coils34.spark_time = time_us;
+        box->coils34.sparkTime = time_us;
         xTaskNotifyFromISR(task_handle, params->flag, eSetValueWithOverwrite, &xHigherPriorityTaskWoken);
         break;
     default:
@@ -75,22 +75,22 @@ void trig_isr_B(void *arg)
     case TRIG_FLAG_12P:
     case TRIG_FLAG_12N:
         // only on first trigger to avoid multiple firing due to noise, to be fixed with hardware debounce
-        box->coils12.trig_time = time_us;
+        box->coils12.coilTime = time_us;
         xTaskNotifyFromISR(task_handle, params->flag, eSetValueWithOverwrite, &xHigherPriorityTaskWoken);
         break;
     case TRIG_FLAG_34P:
     case TRIG_FLAG_34N:
         // only on first trigger to avoid multiple firing due to noise, to be fixed with hardware debounce
-        box->coils34.trig_time = time_us;
+        box->coils34.coilTime = time_us;
         xTaskNotifyFromISR(task_handle, params->flag, eSetValueWithOverwrite, &xHigherPriorityTaskWoken);
         break;
     case SPARK_FLAG_12:
 
-        box->coils12.spark_time = time_us;
+        box->coils12.sparkTime = time_us;
         xTaskNotifyFromISR(task_handle, params->flag, eSetValueWithOverwrite, &xHigherPriorityTaskWoken);
         break;
     case SPARK_FLAG_34:
-        box->coils34.spark_time = time_us;
+        box->coils34.sparkTime = time_us;
         xTaskNotifyFromISR(task_handle, params->flag, eSetValueWithOverwrite, &xHigherPriorityTaskWoken);
         break;
     default:

RotaxMonitor/src/isr.h

@@ -1,17 +1,11 @@
 #pragma once
 
-// Test device Flag
-// #define TEST
-
 // Arduino Libraries
 #include <Arduino.h>
 #include "soc/gpio_struct.h"
 #include <map>
-#ifndef TEST
+
 #include "pins.h"
-#else
-#include "pins_test.h"
-#endif
 #include "datastruct.h"
 
 #define CORE_0 0

RotaxMonitor/src/main.cpp

@@ -16,11 +16,11 @@
 #include <ui.h>
 #include <led.h>
 
-//#define CH_A_ENABLE
+// #define CH_A_ENABLE
-//#define CH_B_ENABLE
+// #define CH_B_ENABLE
 #define CH_A_RT_ENABLE
 #define CH_B_RT_ENABLE
-//#define I2C_ENABLE
+// #define I2C_ENABLE
 #define WEB_ENABLE
 
 // Debug Defines
@@ -28,6 +28,7 @@
 #define WIFI_PASSWORD "maledettirotax"
 #define PSRAM_MAX 4096
 #define QUEUE_MAX 128
+#define HTOP_DELAY 2000
 
 void setup()
 {
@@ -172,13 +173,13 @@ void loop()
         .rt_stack_size = RT_TASK_STACK,
         .rt_priority = RT_TASK_PRIORITY,
         .rt_int = rtIgnitionTask::rtTaskInterruptParams{
-            .isr_ptr = &trig_isr_A,
+            .isrPtr = &trig_isr_A,
-            .trig_pin_12p = TRIG_PIN_A12P,
+            .trigPin_12p = TRIG_PIN_A12P,
-            .trig_pin_12n = TRIG_PIN_A12N,
+            .trigPin_12n = TRIG_PIN_A12N,
-            .trig_pin_34p = TRIG_PIN_A34P,
+            .trigPin_34p = TRIG_PIN_A34P,
-            .trig_pin_34n = TRIG_PIN_A34N,
+            .trigPin_34n = TRIG_PIN_A34N,
-            .spark_pin_12 = SPARK_PIN_A12,
+            .sparkPin_12 = SPARK_PIN_A12,
-            .spark_pin_34 = SPARK_PIN_A34},
+            .sparkPin_34 = SPARK_PIN_A34},
         .rt_io = rtIgnitionTask::rtTaskIOParams{
             .pot_cs_12 = POT_CS_A12,
             .pot_cs_34 = POT_CS_A34,
@@ -204,13 +205,13 @@ void loop()
         .rt_stack_size = RT_TASK_STACK,
         .rt_priority = RT_TASK_PRIORITY,
         .rt_int = rtIgnitionTask::rtTaskInterruptParams{
-            .isr_ptr = &trig_isr_B,
+            .isrPtr = &trig_isr_B,
-            .trig_pin_12p = TRIG_PIN_B12P,
+            .trigPin_12p = TRIG_PIN_B12P,
-            .trig_pin_12n = TRIG_PIN_B12N,
+            .trigPin_12n = TRIG_PIN_B12N,
-            .trig_pin_34p = TRIG_PIN_B34P,
+            .trigPin_34p = TRIG_PIN_B34P,
-            .trig_pin_34n = TRIG_PIN_B34N,
+            .trigPin_34n = TRIG_PIN_B34N,
-            .spark_pin_12 = SPARK_PIN_B12,
+            .sparkPin_12 = SPARK_PIN_B12,
-            .spark_pin_34 = SPARK_PIN_B34},
+            .sparkPin_34 = SPARK_PIN_B34},
         .rt_io = rtIgnitionTask::rtTaskIOParams{
             .pot_cs_12 = POT_CS_B12,
             .pot_cs_34 = POT_CS_B34,
@@ -276,21 +277,52 @@ void loop()
     AstroWebServer webPage(80, LittleFS);
     delay(100);
 
+#ifdef CH_A_RT_ENABLE
     task_A.onMessage([&webPage, &json_data, &data_a](ignitionBoxStatusFiltered sts)
                      {
     json_data["box_a"] = sts.toJson();
     data_a = true; });
+#endif
 
-    #ifdef CH_B_RT_ENABLE
+#ifdef CH_B_RT_ENABLE
     task_B.onMessage([&webPage, &json_data, &data_b](ignitionBoxStatusFiltered sts)
                      {
     json_data["box_b"] = sts.toJson();
     data_b = true; });
-    #endif
 #endif
 
-    task_A.enableSave(true, "ignitionA_test.csv");
+    webPage.registerWsCommand("saveEnable", [&task_A, &task_B](const ArduinoJson::JsonDocument &doc) {
-    task_B.enableSave(true, "ignitionB_test.csv");
+        if(!doc["params"].is<ArduinoJson::JsonObject>()) return;
+        if(!doc["filename_a"].is<std::string>() ||!doc["filename_b"].is<std::string>()){
+            LOG_ERROR("saveEnable invalid or missing filenames");
+            return;
+        }
+        
+        task_A.enableSave(true, doc["filename_a"].as<std::string>());
+        task_B.enableSave(true, doc["filename_a"].as<std::string>());
+        return; });
+
+    webPage.registerWsCommand("saveDisable", [&task_A, &task_B](const ArduinoJson::JsonDocument &doc) {
+        task_A.enableSave(false, "");
+        task_B.enableSave(false, ""); });
+
+    webPage.registerWsCommand("downloadHistory", [](const ArduinoJson::JsonDocument &doc) {
+        LOG_WARN("Command downloadHistory not Implemented");
+    });
+    
+    webPage.registerWsCommand("clearHistory", [](const ArduinoJson::JsonDocument &doc) {
+        LOG_WARN("Command clearHistory not Implemented");
+    });
+    
+    webPage.registerWsCommand("startTest", [](const ArduinoJson::JsonDocument &doc) {
+        LOG_WARN("Command startTest not Implemented");
+    });
+    
+    webPage.registerWsCommand("stopTest", [](const ArduinoJson::JsonDocument &doc) {
+        LOG_WARN("Command stopTest not Implemented");
+    });
+
+#endif
 
     uint32_t monitor_loop = millis();
     uint32_t data_loop = monitor_loop;
@@ -298,21 +330,21 @@ void loop()
     while (running)
     {
         uint32_t this_loop = millis();
-        if (this_loop - monitor_loop > 5000)
+        if (this_loop - monitor_loop > HTOP_DELAY)
         {
             clearScreen();
             printRunningTasksMod(Serial);
             monitor_loop = millis();
         }
-        vTaskDelay(pdMS_TO_TICKS(10));
+        #ifdef WEB_ENABLE
-#ifdef WEB_ENABLE
+        if ((data_a && data_b) || ((this_loop - data_loop > 500) && (data_b || data_b)))
-        if ((data_a && data_b) || (this_loop - data_loop > 500))
         {
             webPage.sendWsData(json_data.as<String>());
             json_data.clear();
             data_a = data_b = false;
             data_loop = millis();
         }
+        vTaskDelay(pdMS_TO_TICKS(10));
 #endif
     } //////////////// INNER LOOP /////////////////////
 

RotaxMonitor/src/pins.h

@@ -41,7 +41,7 @@
 // I2C BUS (PCA9555)
 // =====================
 #define SDA 21
-#define SCL 38
+#define SCL 47
 
 // =====================
 // ADC CONTROL
@@ -50,7 +50,7 @@
 #define ADC_A_DRDY 13
 
 #define ADC_B_CS 3
-#define ADC_B_DRDY 9
+#define ADC_B_DRDY 46
 
 // =====================
 // TRIGGER INPUT INTERRUPTS
@@ -85,7 +85,7 @@
 // =====================
 // PCA9555 I/O EXPANDER BOX_A (OUT)
 // =====================
-#define EXPANDER_A_OUT_ADDR 0xFF
+#define EXPANDER_A_OUT_ADDR 0x7F
 
 // --- DIGITAL POT CHIP SELECT LINES ---
 #define POT_CS_A12 PIN2ADDR(0, EXPANDER_A_OUT_ADDR)
@@ -111,7 +111,7 @@
 // =====================
 // PCA9555 I/O EXPANDER BOX_A (IN)
 // =====================
-#define EXPANDER_A_IN_ADDR 0xFF
+#define EXPANDER_A_IN_ADDR 0x7F
 
 #define SS_A12_ON PIN2ADDR(0, EXPANDER_A_IN_ADDR)
 #define SS_A12_OFF PIN2ADDR(1, EXPANDER_A_IN_ADDR)
@@ -121,7 +121,7 @@
 // =====================
 // PCA9555 I/O EXPANDER BOX_B (OUT)
 // =====================
-#define EXPANDER_B_OUT_ADDR 0xFF
+#define EXPANDER_B_OUT_ADDR 0x7F
 
 // --- DIGITAL POT CHIP SELECT LINES ---
 #define POT_CS_B12 PIN2ADDR(0, EXPANDER_B_OUT_ADDR)
@@ -147,7 +147,7 @@
 // =====================
 // PCA9555 I/O EXPANDER BOX_B (IN)
 // =====================
-#define EXPANDER_B_IN_ADDR 0xFF
+#define EXPANDER_B_IN_ADDR 0x7F
 
 #define SS_B12_ON PIN2ADDR(0, EXPANDER_B_IN_ADDR)
 #define SS_B12_OFF PIN2ADDR(1, EXPANDER_B_IN_ADDR)

RotaxMonitor/src/pins_test.h

@@ -1,84 +0,0 @@
-#pragma once
-#include <Arduino.h>
-
-// =====================
-// UART DEBUG
-// =====================
-#define UART_TX 1     // TX0 (USB seriale)
-#define UART_RX 3     // RX0
-
-
-// =====================
-// SPI BUS
-// =====================
-#define SPI_A_MOSI 23
-#define SPI_A_MISO 19
-#define SPI_A_SCK  18
-
-
-// =====================
-// I2C BUS
-// =====================
-#define SDA 21
-#define SCL 22
-
-
-// =====================
-// ADC CONTROL (SPI + interrupt safe)
-// =====================
-#define ADC_A_CS   5    // chip select
-#define ADC_A_DRDY 34   // input only + interrupt perfetto
-#define ADC_A_RST  27   // output
-#define ADC_A_SYNC 26   // output
-
-
-// =====================
-// DIGITAL OUT
-// =====================
-#define POT_A_CS 25
-#define POT_B_CS 33
-
-
-// =====================
-// TRIGGER INPUT INTERRUPTS
-// =====================
-#define TRIG_PIN_A12P 35
-#define TRIG_PIN_A12N 32
-#define TRIG_PIN_A34P 39
-#define TRIG_PIN_A34N 36
-
-
-// =====================
-// SPARK DETECT INTERRUPTS
-// =====================
-#define SPARK_PIN_A12 4
-#define SPARK_PIN_A34 2
-
-// =====================
-// PCA9555 (I2C EXPANDER)
-// =====================
-
-// --- RESET LINES ---
-#define RST_EXT_A12P    0
-#define RST_EXT_A12N    1
-#define RST_EXT_A34P    2
-#define RST_EXT_A34N    3
-
-// --- RELAY ---
-#define SH_ARM_A34     8
-
-
-// Init Pin Functions
-inline void initTriggerPinsInputs()
-{
-    pinMode(TRIG_PIN_A12P, INPUT_PULLDOWN);
-    pinMode(TRIG_PIN_A12N, INPUT_PULLDOWN);
-    pinMode(TRIG_PIN_A34P, INPUT_PULLDOWN);
-    pinMode(TRIG_PIN_A34N, INPUT_PULLDOWN);
-}
-
-inline void initSparkPinInputs()
-{
-    pinMode(SPARK_PIN_A12, INPUT_PULLDOWN);
-    pinMode(SPARK_PIN_A34, INPUT_PULLDOWN);
-}

RotaxMonitor/src/tasks.cpp

@@ -37,155 +37,156 @@ void rtIgnitionTask::rtIgnitionTask_realtime(void *pvParameters)
     }
 
     // Task Parameters and Devices
-    rtTaskParams *params = (rtTaskParams *)pvParameters;
+    const rtTaskParams *params = (const rtTaskParams *)pvParameters;
-    const rtTaskInterruptParams rt_int = params->rt_int; // copy to avoid external override
+    const rtTaskInterruptParams rtInterrupts = params->rt_int; // copy to avoid external override
-    const rtTaskIOParams rt_rst = params->rt_io;         // copy to avoid external override
+    const rtTaskIOParams rtResets = params->rt_io;         // copy to avoid external override
-    QueueHandle_t rt_queue = params->rt_queue;
+    QueueHandle_t rtQueue = params->rt_queue;
     Devices *dev = params->dev;
     ExternalIO *io = dev->m_ext_io;
     ADS1256 *adc = params->name == "rtIgnTask_A" ? dev->m_adc_a : dev->m_adc_b;
     std::mutex &spi_mutex = params->name == "rtIgnTask_A" ? dev->m_spi_a_mutex : dev->m_spi_b_mutex;
 
-    TaskStatus_t rt_task_info;
+    // Geta task name and additiona info for debug messages
-    vTaskGetInfo(NULL, &rt_task_info, pdFALSE, eInvalid);
+    TaskStatus_t rtTaskInfo;
-
+    vTaskGetInfo(NULL, &rtTaskInfo, pdFALSE, eInvalid);
     LOG_INFO("rtTask Params OK [", params->name.c_str(), "]");
 
-    ignitionBoxStatus ign_box_sts;
+    // Status of ignition box for this task, to be used locally and passed to isr to get timing
+    ignitionBoxStatus ignBoxStatus;
 
     // Variables for ISR, static to be fixed in memory locations
-    isrParams isr_params_t12p{
+    isrParams isrParams_t12p{
         .flag = TRIG_FLAG_12P,
-        .ign_stat = &ign_box_sts,
+        .ign_stat = &ignBoxStatus,
-        .rt_handle_ptr = rt_task_info.xHandle};
+        .rt_handle_ptr = rtTaskInfo.xHandle};
-    isrParams isr_params_t12n{
+    isrParams isrParams_t12n{
         .flag = TRIG_FLAG_12N,
-        .ign_stat = &ign_box_sts,
+        .ign_stat = &ignBoxStatus,
-        .rt_handle_ptr = rt_task_info.xHandle};
+        .rt_handle_ptr = rtTaskInfo.xHandle};
-    isrParams isr_params_t34p{
+    isrParams isrParams_t34p{
         .flag = TRIG_FLAG_34P,
-        .ign_stat = &ign_box_sts,
+        .ign_stat = &ignBoxStatus,
-        .rt_handle_ptr = rt_task_info.xHandle};
+        .rt_handle_ptr = rtTaskInfo.xHandle};
-    isrParams isr_params_t34n{
+    isrParams isrParams_t34n{
         .flag = TRIG_FLAG_34N,
-        .ign_stat = &ign_box_sts,
+        .ign_stat = &ignBoxStatus,
-        .rt_handle_ptr = rt_task_info.xHandle};
+        .rt_handle_ptr = rtTaskInfo.xHandle};
-    isrParams isr_params_sp12{
+    isrParams isrParams_sp12{
         .flag = SPARK_FLAG_12,
-        .ign_stat = &ign_box_sts,
+        .ign_stat = &ignBoxStatus,
-        .rt_handle_ptr = rt_task_info.xHandle};
+        .rt_handle_ptr = rtTaskInfo.xHandle};
-    isrParams isr_params_sp34{
+    isrParams isrParams_sp34{
         .flag = SPARK_FLAG_34,
-        .ign_stat = &ign_box_sts,
+        .ign_stat = &ignBoxStatus,
-        .rt_handle_ptr = rt_task_info.xHandle};
+        .rt_handle_ptr = rtTaskInfo.xHandle};
 
     // Create esp_timer for microsecond precision timeout
-    esp_timer_handle_t timeout_timer;
+    esp_timer_handle_t timeoutTimer;
-    esp_timer_create_args_t timer_args = {
+    esp_timer_create_args_t timeoutTimerArgs = {
         .callback = spark_timeout_callback,
-        .arg = (void *)rt_task_info.xHandle,
+        .arg = (void *)rtTaskInfo.xHandle,
         .dispatch_method = ESP_TIMER_TASK,
         .name = "spark_timeout"};
-    if (esp_timer_create(&timer_args, &timeout_timer) != ESP_OK)
+    if (esp_timer_create(&timeoutTimerArgs, &timeoutTimer) != ESP_OK)
     {
         LOG_INFO("rtTask [", params->name.c_str(), "] Fail to allocate timeoutTimer");
         vTaskDelete(NULL);
     }
 
     // Attach Pin Interrupts
-    attachInterruptArg(digitalPinToInterrupt(rt_int.trig_pin_12p), rt_int.isr_ptr, (void *)&isr_params_t12p, RISING);
+    attachInterruptArg(digitalPinToInterrupt(rtInterrupts.trigPin_12p), rtInterrupts.isrPtr, (void *)&isrParams_t12p, RISING);
-    attachInterruptArg(digitalPinToInterrupt(rt_int.trig_pin_12n), rt_int.isr_ptr, (void *)&isr_params_t12n, RISING);
+    attachInterruptArg(digitalPinToInterrupt(rtInterrupts.trigPin_12n), rtInterrupts.isrPtr, (void *)&isrParams_t12n, RISING);
-    attachInterruptArg(digitalPinToInterrupt(rt_int.trig_pin_34p), rt_int.isr_ptr, (void *)&isr_params_t34p, RISING);
+    attachInterruptArg(digitalPinToInterrupt(rtInterrupts.trigPin_34p), rtInterrupts.isrPtr, (void *)&isrParams_t34p, RISING);
-    attachInterruptArg(digitalPinToInterrupt(rt_int.trig_pin_34n), rt_int.isr_ptr, (void *)&isr_params_t34n, RISING);
+    attachInterruptArg(digitalPinToInterrupt(rtInterrupts.trigPin_34n), rtInterrupts.isrPtr, (void *)&isrParams_t34n, RISING);
-    attachInterruptArg(digitalPinToInterrupt(rt_int.spark_pin_12), rt_int.isr_ptr, (void *)&isr_params_sp12, RISING);
+    attachInterruptArg(digitalPinToInterrupt(rtInterrupts.sparkPin_12), rtInterrupts.isrPtr, (void *)&isrParams_sp12, RISING);
-    attachInterruptArg(digitalPinToInterrupt(rt_int.spark_pin_34), rt_int.isr_ptr, (void *)&isr_params_sp34, RISING);
+    attachInterruptArg(digitalPinToInterrupt(rtInterrupts.sparkPin_34), rtInterrupts.isrPtr, (void *)&isrParams_sp34, RISING);
 
     LOG_INFO("rtTask ISR Attach OK [", params->name.c_str(), "]");
 
     // Global rt_task_ptr variables
-    bool first_cycle = true;
+    bool firstCycle = true;
     bool cycle12 = false;
     bool cycle34 = false;
-    int64_t last_cycle_time = 0;
+    int64_t lastCycleTime = 0;
-    uint32_t n_errors = 0;
+    uint32_t nErrors = 0;
 
     while (params->rt_running)
     {
-        uint32_t pickup_flag = 0;
+        uint32_t pickupFlag = 0;
-        uint32_t spark_flag = 0;
+        uint32_t sparkFlag = 0;
 
         // WAIT FOR PICKUP SIGNAL
         xTaskNotifyWait(
             0x00,         // non pulire all'ingresso
             ULONG_MAX,    // pulisci i primi 8 bit
-            &pickup_flag, // valore ricevuto
+            &pickupFlag, // valore ricevuto
             portMAX_DELAY);
 
-        if (first_cycle && pickup_flag != TRIG_FLAG_12P) // skip first cycle because of possible initial noise on pickup signals at startu
+        if (firstCycle && pickupFlag != TRIG_FLAG_12P) // skip first cycle because of possible initial noise on pickup signals at startu
             continue;
 
         // Start microsecond precision timeout timer
-        esp_timer_stop(timeout_timer); // stop timer in case it was running from previous cycle
+        esp_timer_stop(timeoutTimer); // stop timer in case it was running from previous cycle
-        esp_timer_start_once(timeout_timer, spark_timeout_max);
+        esp_timer_start_once(timeoutTimer, c_sparkTimeoutMax);
 
         // WAIT FOR SPARK TO HAPPEN OR TIMEOUT
         xTaskNotifyWait(
             0x00,           // non pulire all'ingresso
             ULONG_MAX,      // pulisci i primi 8 bit
-            &spark_flag,    // valore ricevuto
+            &sparkFlag,    // valore ricevuto
             portMAX_DELAY); // wait indefinitely, timeout handled by esp_timer
 
         // Handle timeout or spark event
-        if (spark_flag != SPARK_FLAG_TIMEOUT)
+        if (sparkFlag != SPARK_FLAG_TIMEOUT)
-            esp_timer_stop(timeout_timer);
+            esp_timer_stop(timeoutTimer);
 
         // A trigger from pickup 12 is followed by a spark event on 34 or vice versa pickup 34 triggers spark on 12
-        if ((pickup_flag == TRIG_FLAG_12P || pickup_flag == TRIG_FLAG_12N) && (spark_flag != SPARK_FLAG_12 && spark_flag != SPARK_FLAG_TIMEOUT))
+        if ((pickupFlag == TRIG_FLAG_12P || pickupFlag == TRIG_FLAG_12N) && (sparkFlag != SPARK_FLAG_12 && sparkFlag != SPARK_FLAG_TIMEOUT))
         {
-            ign_box_sts.coils12.spark_status = ign_box_sts.coils34.spark_status = sparkStatus::SPARK_SYNC_FAIL;
+            ignBoxStatus.coils12.sparkStatus = ignBoxStatus.coils34.sparkStatus = sparkStatusEnum::SPARK_SYNC_FAIL;
             continue;
         }
 
-        // Select coil status reference based on pickup_flag
+        // Select coil status reference based on pickupFlag
         coilsStatus *coils;
-        switch (pickup_flag)
+        switch (pickupFlag)
         {
         case TRIG_FLAG_12P:
         {
-            first_cycle = false;
+            firstCycle = false;
             // compute engine rpm from cycle time
-            auto current_time = esp_timer_get_time();
+            auto currentTime = esp_timer_get_time();
-            auto cycle_time = current_time - last_cycle_time;
+            auto cycleTime = currentTime - lastCycleTime;
-            last_cycle_time = current_time;
+            lastCycleTime = currentTime;
-            ign_box_sts.eng_rpm = (int32_t)(60.0f / (cycle_time / 1000000.0f));
+            ignBoxStatus.engRpm = (int32_t)(60.0f / (cycleTime / 1000000.0f));
         }
         case TRIG_FLAG_12N:
-            coils = &ign_box_sts.coils12;
+            coils = &ignBoxStatus.coils12;
             break;
         case TRIG_FLAG_34P:
         case TRIG_FLAG_34N:
-            coils = &ign_box_sts.coils34;
+            coils = &ignBoxStatus.coils34;
             break;
         }
 
         // Select logic based on pickup and spark flags
-        switch (pickup_flag)
+        switch (pickupFlag)
         {
         case TRIG_FLAG_12P:
         case TRIG_FLAG_34P:
         {
             // Timeout not occourred, expected POSITIVE edge spark OCCOURRED
-            if (spark_flag != SPARK_FLAG_TIMEOUT)
+            if (sparkFlag != SPARK_FLAG_TIMEOUT)
             {
-                coils->spark_delay = (int32_t)(coils->spark_time - coils->trig_time);
+                coils->sparkDelay = (int32_t)(coils->sparkTime - coils->coilTime);
-                coils->sstart_status = softStartStatus::NORMAL;  // because spark on positive edge
+                coils->softStartStatus = softStartStatusEnum::NORMAL;  // because spark on positive edge
-                coils->spark_status = sparkStatus::SPARK_POS_OK; // do not wait for spark on negative edge
+                coils->sparkStatus = sparkStatusEnum::SPARK_POS_OK; // do not wait for spark on negative edge
             }
             // Timeout occourred, expected POSITIVE edge spark NOT OCCOURRED
-            else if (spark_flag == SPARK_FLAG_TIMEOUT)
+            else if (sparkFlag == SPARK_FLAG_TIMEOUT)
             {
-                coils->spark_status = sparkStatus::SPARK_NEG_WAIT;
+                coils->sparkStatus = sparkStatusEnum::SPARK_NEG_WAIT;
-                coils->sstart_status = softStartStatus::NORMAL;
+                coils->softStartStatus = softStartStatusEnum::NORMAL;
             }
             continue; // Do nothing more on positive pulse
         }
@@ -193,29 +194,29 @@ void rtIgnitionTask::rtIgnitionTask_realtime(void *pvParameters)
         case TRIG_FLAG_12N:
         case TRIG_FLAG_34N:
         {
-            const bool expected_negative = coils->spark_status == sparkStatus::SPARK_NEG_WAIT;
+            const bool negativeSparkExpected = coils->sparkStatus == sparkStatusEnum::SPARK_NEG_WAIT;
             // Timeout not occourred, expected NEGATIVE edge spark OCCOURRED
-            if (spark_flag != SPARK_FLAG_TIMEOUT && expected_negative)
+            if (sparkFlag != SPARK_FLAG_TIMEOUT && negativeSparkExpected)
             {
-                coils->spark_delay = (int32_t)(coils->spark_time - coils->trig_time);
+                coils->sparkDelay = (int32_t)(coils->sparkTime - coils->coilTime);
-                coils->sstart_status = softStartStatus::SOFT_START;
+                coils->softStartStatus = softStartStatusEnum::SOFT_START;
-                coils->spark_status = sparkStatus::SPARK_NEG_OK;
+                coils->sparkStatus = sparkStatusEnum::SPARK_NEG_OK;
             }
             // Timeout occourred, expected POSITIVE edge spark NOT OCCOURRED
-            else if (spark_flag == SPARK_FLAG_TIMEOUT && expected_negative)
+            else if (sparkFlag == SPARK_FLAG_TIMEOUT && negativeSparkExpected)
             {
-                coils->sstart_status = softStartStatus::ERROR;
+                coils->softStartStatus = softStartStatusEnum::ERROR;
-                coils->spark_status = sparkStatus::SPARK_NEG_FAIL;
+                coils->sparkStatus = sparkStatusEnum::SPARK_NEG_FAIL;
             }
             // Timeout not occouured, unexpected negative edge spark
-            else if (spark_flag != SPARK_FLAG_TIMEOUT && !expected_negative)
+            else if (sparkFlag != SPARK_FLAG_TIMEOUT && !negativeSparkExpected)
             {
-                coils->sstart_status = softStartStatus::SOFT_START;
+                coils->softStartStatus = softStartStatusEnum::SOFT_START;
-                coils->spark_status = sparkStatus::SPARK_NEG_UNEXPECTED;
+                coils->sparkStatus = sparkStatusEnum::SPARK_NEG_UNEXPECTED;
             }
             // Wait for finish of negative pulse to save data to buffer
-            coils->n_events++;
+            coils->nEvents++;
-            if (pickup_flag == TRIG_FLAG_12N)
+            if (pickupFlag == TRIG_FLAG_12N)
                 cycle12 = true;
             else
                 cycle34 = true;
@@ -227,102 +228,122 @@ void rtIgnitionTask::rtIgnitionTask_realtime(void *pvParameters)
 
         if (cycle12 && cycle34) // wait for both 12 and 34 cycles to complete before sending data to main loop and resetting peak detectors
         {
+            // disable interrupts during adc samples
+            disableInterrupt(digitalPinToInterrupt(rtInterrupts.trigPin_12p));
+            disableInterrupt(digitalPinToInterrupt(rtInterrupts.trigPin_12n));
+            disableInterrupt(digitalPinToInterrupt(rtInterrupts.trigPin_34p));
+            disableInterrupt(digitalPinToInterrupt(rtInterrupts.trigPin_34n));
+            disableInterrupt(digitalPinToInterrupt(rtInterrupts.sparkPin_12));
+            disableInterrupt(digitalPinToInterrupt(rtInterrupts.sparkPin_34));
+
+            // reset coils 12 and 34 cycles
             cycle12 = false;
             cycle34 = false;
 
-            if (ign_box_sts.coils12.spark_status == sparkStatus::SPARK_POS_FAIL || ign_box_sts.coils12.spark_status == sparkStatus::SPARK_NEG_FAIL)
+            if (ignBoxStatus.coils12.sparkStatus == sparkStatusEnum::SPARK_POS_FAIL || ignBoxStatus.coils12.sparkStatus == sparkStatusEnum::SPARK_NEG_FAIL)
-                ign_box_sts.coils12.n_missed_firing++;
+                ignBoxStatus.coils12.nMissedFiring++;
-            if (ign_box_sts.coils34.spark_status == sparkStatus::SPARK_POS_FAIL || ign_box_sts.coils34.spark_status == sparkStatus::SPARK_NEG_FAIL)
+            if (ignBoxStatus.coils34.sparkStatus == sparkStatusEnum::SPARK_POS_FAIL || ignBoxStatus.coils34.sparkStatus == sparkStatusEnum::SPARK_NEG_FAIL)
-                ign_box_sts.coils34.n_missed_firing++;
+                ignBoxStatus.coils34.nMissedFiring++;
 
             //  read adc channels: pickup12, out12 [ pos + neg ]
             if (adc) // read only if adc initialized
             {
                 std::lock_guard<std::mutex> lock(spi_mutex);
-                uint32_t start_adc_read = esp_timer_get_time();
+                uint32_t startAdcReadTime = esp_timer_get_time();
                 // from peak detector circuits
-                ign_box_sts.coils12.peak_p_in = adc->convertToVoltage(adc->cycleSingle());
+                ignBoxStatus.coils12.peakPos = adc->convertToVoltage(adc->cycleSingle());
-                ign_box_sts.coils12.peak_n_in = adc->convertToVoltage(adc->cycleSingle());
+                ignBoxStatus.coils12.peakNeg = adc->convertToVoltage(adc->cycleSingle());
-                ign_box_sts.coils34.peak_p_in = adc->convertToVoltage(adc->cycleSingle());
+                ignBoxStatus.coils34.peakPos = adc->convertToVoltage(adc->cycleSingle());
-                ign_box_sts.coils34.peak_n_in = adc->convertToVoltage(adc->cycleSingle());
+                ignBoxStatus.coils34.peakNeg = adc->convertToVoltage(adc->cycleSingle());
-                ign_box_sts.coils12.peak_p_out = adc->convertToVoltage(adc->cycleSingle());
+                ignBoxStatus.coils12.trigLevelPos = adc->convertToVoltage(adc->cycleSingle());
-                ign_box_sts.coils12.peak_n_out = adc->convertToVoltage(adc->cycleSingle());
+                ignBoxStatus.coils12.trigLevelNeg = adc->convertToVoltage(adc->cycleSingle());
-                ign_box_sts.coils34.peak_p_out = adc->convertToVoltage(adc->cycleSingle());
+                ignBoxStatus.coils34.trigLevelPos = adc->convertToVoltage(adc->cycleSingle());
-                ign_box_sts.coils34.peak_n_out = adc->convertToVoltage(adc->cycleSingle());
+                ignBoxStatus.coils34.trigLevelNeg = adc->convertToVoltage(adc->cycleSingle());
-                ign_box_sts.adc_read_time = (int32_t)(esp_timer_get_time() - start_adc_read);
                 adc->stopConversion();
+                ignBoxStatus.adcReadTime = (int32_t)(esp_timer_get_time() - startAdcReadTime);
             }
             else // simulate adc read timig
-                vTaskDelay(pdMS_TO_TICKS(c_adc_time));
+                vTaskDelay(pdMS_TO_TICKS(c_adcTime));
 
             // reset peak detectors + sample and hold
             // outputs on io expander
             if (io)
             {
+                uint32_t startIoReadWriteTime = esp_timer_get_time();
                 // Discharge Pulse
-                io->extDigitalWrite(rt_rst.sh_disch_12, true);
+                io->extDigitalWrite(rtResets.sh_disch_12, true);
-                io->extDigitalWrite(rt_rst.sh_disch_34, true);
+                io->extDigitalWrite(rtResets.sh_disch_34, true);
                 delayMicroseconds(250);
-                io->extDigitalWrite(rt_rst.sh_disch_12, false);
+                io->extDigitalWrite(rtResets.sh_disch_12, false);
-                io->extDigitalWrite(rt_rst.sh_disch_34, false);
+                io->extDigitalWrite(rtResets.sh_disch_34, false);
                 // Safety delay
                 delayMicroseconds(500);
                 // Re-Arm Pulse
-                io->extDigitalWrite(rt_rst.sh_arm_12, true);
+                io->extDigitalWrite(rtResets.sh_arm_12, true);
-                io->extDigitalWrite(rt_rst.sh_arm_34, true);
+                io->extDigitalWrite(rtResets.sh_arm_34, true);
                 delayMicroseconds(250);
-                io->extDigitalWrite(rt_rst.sh_arm_12, false);
+                io->extDigitalWrite(rtResets.sh_arm_12, false);
-                io->extDigitalWrite(rt_rst.sh_arm_34, false);
+                io->extDigitalWrite(rtResets.sh_arm_34, false);
+                ignBoxStatus.ioReadWriteTime = (int32_t)(esp_timer_get_time() - startIoReadWriteTime);
             }
             else
-                vTaskDelay(pdMS_TO_TICKS(c_io_time));
+                vTaskDelay(pdMS_TO_TICKS(c_ioTime));
 
             // send essage to main loop with ignition info, by copy so local static variable is ok
-            if (rt_queue)
+            if (rtQueue)
             {
-                ign_box_sts.timestamp = esp_timer_get_time(); // update data timestamp
+                ignBoxStatus.timestamp = esp_timer_get_time(); // update data timestamp
-                if (xQueueSendToBack(rt_queue, (void *)&ign_box_sts, 0) != pdPASS)
+                if (xQueueSendToBack(rtQueue, (void *)&ignBoxStatus, 0) != pdPASS)
-                    ign_box_sts.n_queue_errors = ++n_errors;
+                    ignBoxStatus.nQueueErrors = ++nErrors;
             }
+
+            // enable interrupts ready for a new cycle
+            enableInterrupt(digitalPinToInterrupt(rtInterrupts.trigPin_12p));
+            enableInterrupt(digitalPinToInterrupt(rtInterrupts.trigPin_12n));
+            enableInterrupt(digitalPinToInterrupt(rtInterrupts.trigPin_34p));
+            enableInterrupt(digitalPinToInterrupt(rtInterrupts.trigPin_34n));
+            enableInterrupt(digitalPinToInterrupt(rtInterrupts.sparkPin_12));
+            enableInterrupt(digitalPinToInterrupt(rtInterrupts.sparkPin_34));
         }
     }
     // Delete the timeout timer
-    esp_timer_delete(timeout_timer);
+    esp_timer_stop(timeoutTimer);
+    esp_timer_delete(timeoutTimer);
     LOG_WARN("rtTask Ending [", params->name.c_str(), "]");
     // Ignition A Interrupts DETACH
-    detachInterrupt(rt_int.trig_pin_12p);
+    detachInterrupt(rtInterrupts.trigPin_12p);
-    detachInterrupt(rt_int.trig_pin_12n);
+    detachInterrupt(rtInterrupts.trigPin_12n);
-    detachInterrupt(rt_int.trig_pin_34p);
+    detachInterrupt(rtInterrupts.trigPin_34p);
-    detachInterrupt(rt_int.trig_pin_34n);
+    detachInterrupt(rtInterrupts.trigPin_34n);
-    detachInterrupt(rt_int.spark_pin_12);
+    detachInterrupt(rtInterrupts.sparkPin_12);
-    detachInterrupt(rt_int.spark_pin_34);
+    detachInterrupt(rtInterrupts.sparkPin_34);
     // delete present task
     vTaskDelete(NULL);
 }
 
 ///////////// CLASS MEMBER DEFINITIONS /////////////
-rtIgnitionTask::rtIgnitionTask(const rtTaskParams params, const uint32_t history_size, const uint32_t queue_size, const uint8_t core, std::mutex &fs_mutex, fs::FS &filesystem) : m_params(params), m_filesystem(filesystem), m_fs_mutex(fs_mutex), m_core(core), m_max_history(history_size)
+rtIgnitionTask::rtIgnitionTask(const rtTaskParams params, const uint32_t history_size, const uint32_t queue_size, const uint8_t core, std::mutex &fs_mutex, fs::FS &filesystem) : m_params(params), m_filesystem(filesystem), m_filesystemMutex(fs_mutex), m_core(core), m_historyMax(history_size)
 {
     LOG_WARN("Starting Manager for [", m_params.name.c_str(), "]");
     // create queue buffers
-    m_queue = xQueueCreate(queue_size, sizeof(ignitionBoxStatus));
+    m_rtQueueHandle = xQueueCreate(queue_size, sizeof(ignitionBoxStatus));
-    if (!m_queue)
+    if (!m_rtQueueHandle)
     {
         LOG_ERROR("Unable To Create Task [", params.name.c_str(), "] queues");
-        m_manager_status = rtTaskStatus::ERROR;
+        m_managerStatus = rtTaskStatus::ERROR;
         return;
     }
     else
-        m_params.rt_queue = m_queue;
+        m_params.rt_queue = m_rtQueueHandle;
 
     try
     {
         // create PSram history vectors
-        m_history_0 = PSHistory(history_size);
+        m_historyBuf0 = PSHistory(history_size);
-        m_history_1 = PSHistory(history_size);
+        m_historyBuf1 = PSHistory(history_size);
         // assing active and writable history
-        m_active_history = std::unique_ptr<PSHistory>(&m_history_0);
+        m_historyActive = std::unique_ptr<PSHistory>(&m_historyBuf0);
-        m_save_history = std::unique_ptr<PSHistory>(&m_history_1);
+        m_historyInactive = std::unique_ptr<PSHistory>(&m_historyBuf1);
     }
     catch (std::bad_alloc &e)
     {
@@ -330,86 +351,87 @@ rtIgnitionTask::rtIgnitionTask(const rtTaskParams params, const uint32_t history
         return;
     }
 
-    m_name = (std::string("man_") + m_params.name).c_str();
+    m_managerTaskName = (std::string("man_") + m_params.name).c_str();
     auto task_success = xTaskCreatePinnedToCore(
         rtIgnitionTask_manager,
-        m_name.c_str(),
+        m_managerTaskName.c_str(),
         RT_TASK_STACK,
         (void *)this,
         m_params.rt_priority >> 2,
-        &m_manager_handle,
+        &m_managerHandle,
         m_core);
 
     if (task_success != pdPASS)
     {
         LOG_ERROR("Unable To Create Manager for [", params.name.c_str(), "]");
-        m_manager_status = rtTaskStatus::ERROR;
+        m_managerStatus = rtTaskStatus::ERROR;
         return;
     }
 
     // average every 10 samples
-    m_info_filtered = ignitionBoxStatusFiltered(10);
+    m_statusFiltered = ignitionBoxStatusFiltered(m_filterSize);
-    m_last_data = millis();
+    m_dataLast = millis();
-    m_manager_status = rtTaskStatus::OK;
+    m_managerStatus = rtTaskStatus::OK;
 }
 
 rtIgnitionTask::~rtIgnitionTask()
 {
-    if (m_rt_handle)
+    if (m_rtHandle)
-        vTaskDelete(m_rt_handle);
+        vTaskDelete(m_rtHandle);
-    if (m_manager_handle)
+    if (m_managerHandle)
-        vTaskDelete(m_manager_handle);
+        vTaskDelete(m_managerHandle);
-    if (m_queue)
+    if (m_rtQueueHandle)
-        vQueueDelete(m_queue);
+        vQueueDelete(m_rtQueueHandle);
 }
 
 void rtIgnitionTask::run()
 {
     // receive new data from the queue
-    auto new_data = xQueueReceive(m_queue, &m_last_status, 0); // non blocking receive
+    auto new_data = xQueueReceive(m_rtQueueHandle, &m_statusLast, 0); // non blocking receive
 
     if (new_data == pdPASS)
     {
-        m_last_data = millis();
+        m_dataLast = millis();
-        m_manager_status = rtTaskStatus::RUNNING;
+        m_managerStatus = rtTaskStatus::RUNNING;
         // if history buffer is full swap buffers and if enabled save history buffer
-        if (m_counter_status >= m_max_history)
+        if (m_statusCounter >= m_historyMax)
         {
-            LOG_DEBUG("Save for Buffer Full: ", m_counter_status);
+            LOG_DEBUG("Save for Buffer Full: ", m_statusCounter);
-            m_counter_status = 0;
+            m_statusCounter = 0;
-            m_partial_save = false; // reset partial save flag on new data cycle
+            m_savePartial = false; // reset partial save flag on new data cycle
-            std::swap(m_active_history, m_save_history);
+            std::swap(m_historyActive, m_historyInactive);
-            if (m_enable_save)
+            if (m_historySaveEnable)
-                saveHistory(*m_save_history, m_history_path); // directly call the save task function to save without delay
+                saveHistory(*m_historyInactive, m_historyPath); // directly call the save task function to save without delay
                 LOG_INFO("Save History");
         }
 
         // update filtered data
-        m_info_filtered.update(m_last_status);
+        m_statusFiltered.update(m_statusLast);
-        (*m_active_history)[m_counter_status] = m_last_status;
+        (*m_historyActive)[m_statusCounter] = m_statusLast;
 
-        if (m_on_message_cb && m_counter_status % 10 == 0)
+        // callback 
+        if (m_onFilteredStatusUpdate && m_statusCounter % m_filterSize == 0)
         {
-            m_on_message_cb(m_info_filtered);
+            m_onFilteredStatusUpdate(m_statusFiltered);
         }
 
         // update data counter
-        m_counter_status++;
+        m_statusCounter++;
     }
     else
     {
-        if (millis() - m_last_data > c_idle_time)
+        if (millis() - m_dataLast > c_idleTime)
         {
-            if (m_counter_status > 0 && !m_partial_save)
+            if (m_statusCounter > 0 && !m_savePartial)
             {
-                LOG_DEBUG("Save Partial: ", m_counter_status);
+                LOG_DEBUG("Save Partial: ", m_statusCounter);
-                m_active_history->resize(m_counter_status);
+                m_historyActive->resize(m_statusCounter);
-                saveHistory(*m_active_history, m_history_path);
+                saveHistory(*m_historyActive, m_historyPath);
-                m_active_history->resize(m_max_history);
+                m_historyActive->resize(m_historyMax);
-                m_counter_status = 0;
+                m_statusCounter = 0;
-                m_partial_save = true;
+                m_savePartial = true;
             }
-            m_manager_status = rtTaskStatus::IDLE;
+            m_managerStatus = rtTaskStatus::IDLE;
         }
     }
 }
@@ -423,22 +445,22 @@ const bool rtIgnitionTask::start()
         m_params.rt_stack_size,
         (void *)&m_params,
         m_params.rt_priority,
-        &m_rt_handle,
+        &m_rtHandle,
         m_core);
-    const bool success = task_success == pdPASS && m_rt_handle != nullptr;
+    const bool success = task_success == pdPASS && m_rtHandle != nullptr;
     if (success)
-        m_manager_status = rtTaskStatus::IDLE;
+        m_managerStatus = rtTaskStatus::IDLE;
     return success;
 }
 
 const bool rtIgnitionTask::stop()
 {
     LOG_WARN("Ending Task [", m_params.name.c_str(), "]");
-    if (m_rt_handle)
+    if (m_rtHandle)
     {
         m_params.rt_running = false;
-        m_rt_handle = nullptr;
+        m_rtHandle = nullptr;
-        m_manager_status = rtTaskStatus::STOPPED;
+        m_managerStatus = rtTaskStatus::STOPPED;
         return true;
     }
     return false;
@@ -446,26 +468,26 @@ const bool rtIgnitionTask::stop()
 
 const ignitionBoxStatus rtIgnitionTask::getLast() const
 {
-    return m_last_status;
+    return m_statusLast;
 }
 
 const ignitionBoxStatusFiltered rtIgnitionTask::getFiltered() const
 {
-    return m_info_filtered;
+    return m_statusFiltered;
 }
 
 const rtIgnitionTask::rtTaskStatus rtIgnitionTask::getStatus() const
 {
-    return m_manager_status;
+    return m_managerStatus;
 }
 
 void rtIgnitionTask::enableSave(const bool enable, const std::filesystem::path filename)
 {
-    m_enable_save = enable;
+    m_historySaveEnable = enable;
     if (enable && !filename.empty())
     {
         LOG_WARN("Save History Enabled Task [", m_params.name.c_str(), "]");
-        m_history_path = m_filesystem.mountpoint() / filename;
+        m_historyPath = m_filesystem.mountpoint() / filename;
     }
     else
     {
@@ -475,13 +497,13 @@ void rtIgnitionTask::enableSave(const bool enable, const std::filesystem::path f
 
 void rtIgnitionTask::onMessage(std::function<void(ignitionBoxStatusFiltered)> callaback)
 {
-    m_on_message_cb = callaback;
+    m_onFilteredStatusUpdate = callaback;
 }
 
-void rtIgnitionTask::saveHistory(const rtIgnitionTask::PSHistory &history, const std::filesystem::path &file_name)
+void rtIgnitionTask::saveHistory(const rtIgnitionTask::PSHistory &history, const std::filesystem::path &fileName)
 {
     // Lock filesystem mutex to avoid concurrent access
-    std::lock_guard<std::mutex> fs_lock(m_fs_mutex);
+    std::lock_guard<std::mutex> fs_lock(m_filesystemMutex);
 
     // Check for free space
     if (LittleFS.totalBytes() - LittleFS.usedBytes() < history.size() * sizeof(ignitionBoxStatus)) // check if at least 1MB is free for saving history
@@ -491,26 +513,26 @@ void rtIgnitionTask::saveHistory(const rtIgnitionTask::PSHistory &history, const
     }
 
     // create complete file path
-    const std::filesystem::path mount_point = std::filesystem::path(m_filesystem.mountpoint());
+    const std::filesystem::path mountPoint = std::filesystem::path(m_filesystem.mountpoint());
-    std::filesystem::path file_path = file_name;
+    std::filesystem::path filePath = fileName;
-    if (file_name.root_path() != mount_point)
+    if (fileName.root_path() != mountPoint)
-        file_path = mount_point / file_name;
+        filePath = mountPoint / fileName;
 
     // if firt save remove old file and create new
-    auto save_flags = std::ios::out;
+    auto saveFlags = std::ios::out;
-    if (m_first_save)
+    if (m_saveFirst)
     {
-        save_flags |= std::ios::trunc;          // overwrite existing file
+        saveFlags |= std::ios::trunc;          // overwrite existing file
-        m_filesystem.remove(file_path.c_str()); // ensure file is removed before saving to avoid issues with appending to existing file in SPIFFS
+        m_filesystem.remove(filePath.c_str()); // ensure file is removed before saving to avoid issues with appending to existing file in SPIFFS
-        LOG_INFO("Saving history to Flash, new file:", file_path.c_str());
+        LOG_INFO("Saving history to Flash, new file:", filePath.c_str());
     }
     else // else append to existing file
     {
-        save_flags |= std::ios::app; // append to new file
+        saveFlags |= std::ios::app; // append to new file
-        LOG_INFO("Saving history to Flash, appending to existing file:", file_path.c_str());
+        LOG_INFO("Saving history to Flash, appending to existing file:", filePath.c_str());
     }
 
-    std::ofstream ofs(file_path, save_flags);
+    std::ofstream ofs(filePath, saveFlags);
     if (ofs.fail())
     {
         LOG_ERROR("Failed to open file for writing");
@@ -518,38 +540,38 @@ void rtIgnitionTask::saveHistory(const rtIgnitionTask::PSHistory &history, const
     }
 
     // write csv header
-    if (m_first_save)
+    if (m_saveFirst)
     {
         ofs << "TS,EVENTS_12,DLY_12,STAT_12,V_12_1,V_12_2,V_12_3,V_12_4,IGNITION_MODE_12,"
             << "EVENTS_34,DLY_34,STAT_34,V_34_1,V_34_2,V_34_3,V_34_4,IGNITION_MODE_34,"
             << "ENGINE_RPM,ADC_READTIME,N_QUEUE_ERRORS"
             << std::endl;
         ofs.flush();
-        m_first_save = false;
+        m_saveFirst = false;
     }
 
     for (const auto &entry : history)
     {
         ofs << std::to_string(entry.timestamp) << ","
-            << std::to_string(entry.coils12.n_events) << ","
+            << std::to_string(entry.coils12.nEvents) << ","
-            << std::to_string(entry.coils12.spark_delay) << ","
+            << std::to_string(entry.coils12.sparkDelay) << ","
-            << std::string(sparkStatusNames.at(entry.coils12.spark_status)) << ","
+            << std::string(sparkStatusNames.at(entry.coils12.sparkStatus)) << ","
-            << std::to_string(entry.coils12.peak_p_in) << ","
+            << std::to_string(entry.coils12.peakPos) << ","
-            << std::to_string(entry.coils12.peak_n_in) << ","
+            << std::to_string(entry.coils12.peakNeg) << ","
-            << std::to_string(entry.coils12.peak_p_out) << ","
+            << std::to_string(entry.coils12.trigLevelPos) << ","
-            << std::to_string(entry.coils12.peak_n_out) << ","
+            << std::to_string(entry.coils12.trigLevelNeg) << ","
-            << std::string(softStartStatusNames.at(entry.coils12.sstart_status)) << ","
+            << std::string(softStartStatusNames.at(entry.coils12.softStartStatus)) << ","
-            << std::to_string(entry.coils34.n_events) << ","
+            << std::to_string(entry.coils34.nEvents) << ","
-            << std::to_string(entry.coils34.spark_delay) << ","
+            << std::to_string(entry.coils34.sparkDelay) << ","
-            << std::string(sparkStatusNames.at(entry.coils34.spark_status)) << ","
+            << std::string(sparkStatusNames.at(entry.coils34.sparkStatus)) << ","
-            << std::to_string(entry.coils34.peak_p_in) << ","
+            << std::to_string(entry.coils34.peakPos) << ","
-            << std::to_string(entry.coils34.peak_n_in) << ","
+            << std::to_string(entry.coils34.peakNeg) << ","
-            << std::to_string(entry.coils34.peak_p_out) << ","
+            << std::to_string(entry.coils34.trigLevelPos) << ","
-            << std::to_string(entry.coils34.peak_n_out) << ","
+            << std::to_string(entry.coils34.trigLevelNeg) << ","
-            << std::string(softStartStatusNames.at(entry.coils34.sstart_status)) << ","
+            << std::string(softStartStatusNames.at(entry.coils34.softStartStatus)) << ","
-            << std::to_string(entry.eng_rpm) << ","
+            << std::to_string(entry.engRpm) << ","
-            << std::to_string(entry.adc_read_time) << ","
+            << std::to_string(entry.adcReadTime) << ","
-            << std::to_string(entry.n_queue_errors);
+            << std::to_string(entry.nQueueErrors);
         ofs << std::endl;
         ofs.flush();
     }

RotaxMonitor/src/tasks.h

@@ -22,9 +22,6 @@
 // DEVICES
 #include "devices.h"
 
-// Global Variables and Flags
-const uint32_t spark_timeout_max = 500; // in microseconds
-
 // Debug Variables
 #ifdef DEBUG
 static const std::map<const uint32_t, const char *> names = {
@@ -46,13 +43,13 @@ public:
     // RT task Interrupt parameters
     struct rtTaskInterruptParams
     {
-        void (*isr_ptr)(void *);
+        void (*isrPtr)(void *);
-        const uint8_t trig_pin_12p;
+        const uint8_t trigPin_12p;
-        const uint8_t trig_pin_12n;
+        const uint8_t trigPin_12n;
-        const uint8_t trig_pin_34p;
+        const uint8_t trigPin_34p;
-        const uint8_t trig_pin_34n;
+        const uint8_t trigPin_34n;
-        const uint8_t spark_pin_12;
+        const uint8_t sparkPin_12;
-        const uint8_t spark_pin_34;
+        const uint8_t sparkPin_34;
     };
 
     // RT Task Peak Detector Reset pins
@@ -123,38 +120,39 @@ private: // static functions for FreeRTOS
 
 private:
     bool m_running = true;
-    rtTaskStatus m_manager_status = INIT;
+    rtTaskStatus m_managerStatus = INIT;
-    std::string m_name;
-
     rtTaskParams m_params;
+
     const uint8_t m_core;
+    std::string m_managerTaskName;
+    TaskHandle_t m_rtHandle = nullptr;
+    TaskHandle_t m_managerHandle = nullptr;
+    QueueHandle_t m_rtQueueHandle = nullptr;
 
-    TaskHandle_t m_rt_handle = nullptr;
+    const uint32_t m_historyMax;
-    TaskHandle_t m_manager_handle = nullptr;
+    bool m_historySaveEnable = false;
-    QueueHandle_t m_queue = nullptr;
+    std::filesystem::path m_historyPath;
+    PSHistory m_historyBuf0;
+    PSHistory m_historyBuf1;
+    std::unique_ptr<PSHistory> m_historyActive;
+    std::unique_ptr<PSHistory> m_historyInactive;
 
-    bool m_enable_save = false;
+    bool m_savePartial = false;
-    std::filesystem::path m_history_path;
+    bool m_saveFirst = true;
-    const uint32_t m_max_history;
-    PSHistory m_history_0;
-    PSHistory m_history_1;
-    std::unique_ptr<PSHistory> m_active_history;
-    std::unique_ptr<PSHistory> m_save_history;
     fs::FS &m_filesystem;
-    std::mutex &m_fs_mutex;
+    std::mutex &m_filesystemMutex;
 
-    bool m_partial_save = false;
+    uint8_t m_filterSize = 10;
-    bool m_first_save = true;
+    uint32_t m_statusCounter = 0;
+    uint32_t m_dataLast = 0;
+    ignitionBoxStatus m_statusLast;
+    ignitionBoxStatusFiltered m_statusFiltered;
 
-    uint32_t m_counter_status = 0;
+    std::function<void(ignitionBoxStatusFiltered)> m_onFilteredStatusUpdate = nullptr;
-    uint32_t m_last_data = 0;
-    ignitionBoxStatus m_last_status;
-    ignitionBoxStatusFiltered m_info_filtered;
 
-    std::function<void(ignitionBoxStatusFiltered)> m_on_message_cb = nullptr;
+    // Global Variables and Flags
-
+    static const uint32_t c_sparkTimeoutMax = 500;     // in microseconds
-    static const uint32_t c_idle_time = 10000;       // in mS
+    static const uint32_t c_idleTime = 10000;       // in mS
-    static const uint32_t c_spark_timeout_max = 500; // uS
+    static const uint8_t c_adcTime = 4;             // in mS
-    static const uint8_t c_adc_time = 4;             // in mS
+    static const uint8_t c_ioTime = 2;              // in mS
-    static const uint8_t c_io_time = 2;              // in mS
 };

RotaxMonitor/src/ui.cpp

@@ -44,30 +44,30 @@ void printInfo(const ignitionBoxStatus &info)
     setCursor(0, 0);
     printField("++ Timestamp ++", (uint32_t)info.timestamp);
     Serial.println("========== Coils 12 =============");
-    printField("Events", info.coils12.n_events);
+    printField("Events", info.coils12.nEvents);
-    printField("Events Missed", info.coils12.n_missed_firing);
+    printField("Events Missed", info.coils12.nMissedFiring);
-    printField("Spark Dly", (uint32_t)info.coils12.spark_delay);
+    printField("Spark Dly", (uint32_t)info.coils12.sparkDelay);
-    printField("Spark Sts", sparkStatusNames.at(info.coils12.spark_status));
+    printField("Spark Sts", sparkStatusNames.at(info.coils12.sparkStatus));
-    printField("Peak P_IN", info.coils12.peak_p_in);
+    printField("Peak P_IN", info.coils12.peakPos);
-    printField("Peak N_IN", info.coils12.peak_n_in);
+    printField("Peak N_IN", info.coils12.peakNeg);
-    printField("Peak P_OUT", info.coils12.peak_p_out);
+    printField("Peak P_OUT", info.coils12.trigLevelPos);
-    printField("Peak N_OUT", info.coils12.peak_n_out);
+    printField("Peak N_OUT", info.coils12.trigLevelNeg);
-    printField("Soft Start ", softStartStatusNames.at(info.coils12.sstart_status));
+    printField("Soft Start ", softStartStatusNames.at(info.coils12.softStartStatus));
 
     Serial.println("========== Coils 34 =============");
-    printField("Events", info.coils34.n_events);
+    printField("Events", info.coils34.nEvents);
-    printField("Events Missed", info.coils34.n_missed_firing);
+    printField("Events Missed", info.coils34.nMissedFiring);
-    printField("Spark Dly", (uint32_t)info.coils34.spark_delay);
+    printField("Spark Dly", (uint32_t)info.coils34.sparkDelay);
-    printField("Spark Sts", sparkStatusNames.at(info.coils34.spark_status));
+    printField("Spark Sts", sparkStatusNames.at(info.coils34.sparkStatus));
-    printField("Peak P_IN", info.coils34.peak_p_in);
+    printField("Peak P_IN", info.coils34.peakPos);
-    printField("Peak N_IN", info.coils34.peak_n_in);
+    printField("Peak N_IN", info.coils34.peakNeg);
-    printField("Peak P_OUT", info.coils34.peak_p_out);
+    printField("Peak P_OUT", info.coils34.trigLevelPos);
-    printField("Peak N_OUT", info.coils34.peak_n_out);
+    printField("Peak N_OUT", info.coils34.trigLevelNeg);
-    printField("Soft Start ", softStartStatusNames.at(info.coils34.sstart_status));
+    printField("Soft Start ", softStartStatusNames.at(info.coils34.softStartStatus));
 
     Serial.println("============ END ===============");
     Serial.println();
-    printField("Engine RPM", info.eng_rpm);
+    printField("Engine RPM", info.engRpm);
-    printField("ADC Read Time", info.adc_read_time);
+    printField("ADC Read Time", info.adcReadTime);
-    printField("Queue Errors", info.n_queue_errors);
+    printField("Queue Errors", info.nQueueErrors);
 }

RotaxMonitor/src/webserver.cpp

@@ -9,7 +9,7 @@ void on_ping(TimerHandle_t xTimer)
     ws->cleanupClients();
 }
 
-AstroWebServer::AstroWebServer(const uint8_t port, fs::FS &filesystem) : m_port(port), m_webserver(AsyncWebServer(port)), m_websocket(AsyncWebSocket("/ws")), m_filesystem(filesystem)
+AstroWebServer::AstroWebServer(const uint8_t port, fs::FS &filesystem) : c_port(port), m_webserver(AsyncWebServer(port)), m_websocket(AsyncWebSocket("/ws")), m_filesystem(filesystem)
 {
     LOG_DEBUG("Initializing Web Server");
     m_websocket.onEvent([this](AsyncWebSocket *server, AsyncWebSocketClient *client,
@@ -26,7 +26,8 @@ AstroWebServer::AstroWebServer(const uint8_t port, fs::FS &filesystem) : m_port(
     m_webserver.begin();
     m_websocket.enable(true);
 
-    m_pingTimer = xTimerCreate("wsPingTimer", pdMS_TO_TICKS(2000), pdTRUE, (void *)&m_websocket, on_ping);
+    m_pingTimer = xTimerCreate("wsPingTimer", pdMS_TO_TICKS(c_pingTime), pdTRUE, (void *)&m_websocket, on_ping);
+    xTimerStart(m_pingTimer, pdMS_TO_TICKS(10));
 
     registerWsCommand("setTime", [this](const ArduinoJson::JsonDocument &doc)
                     { onSetTme(doc); });
@@ -36,6 +37,7 @@ AstroWebServer::AstroWebServer(const uint8_t port, fs::FS &filesystem) : m_port(
 
 AstroWebServer::~AstroWebServer()
 {
+    xTimerStop(m_pingTimer, 0);
     xTimerDelete(m_pingTimer, pdMS_TO_TICKS(10));
     m_webserver.removeHandler(&m_websocket);
     m_webserver.end();
@@ -69,13 +71,13 @@ void AstroWebServer::onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *cli
     switch (type)
     {
     case WS_EVT_CONNECT:
-        LOG_DEBUG("WS client IP[", client->remoteIP().toString().c_str(), "]-ID[", client->id(), "] CONNECTED");
+        LOG_DEBUG("WS client IP [", client->remoteIP().toString().c_str(), "]-ID [", client->id(), "] CONNECTED");
         break;
     case WS_EVT_DISCONNECT:
-        LOG_DEBUG("WS client IP[", client->remoteIP().toString().c_str(), "]-ID[", client->id(), "] DISCONNECTED");
+        LOG_DEBUG("WS client IP [", client->remoteIP().toString().c_str(), "]-ID [", client->id(), "] DISCONNECTED");
         break;
     case WS_EVT_PONG:
-        LOG_DEBUG("WS client IP[", client->remoteIP().toString().c_str(), "]-ID[", client->id(), "] PONG");
+        LOG_DEBUG("WS client IP [", client->remoteIP().toString().c_str(), "]-ID [", client->id(), "] PONG");
         break;
     case WS_EVT_DATA:
     {

RotaxMonitor/src/webserver.h

@@ -35,7 +35,8 @@ private:
     void onSetTme(const ArduinoJson::JsonDocument &doc);
 
 private:
-    const uint8_t m_port = 80;
+    const uint8_t c_port = 80;
+    const uint32_t c_pingTime = 5000;
     fs::FS &m_filesystem;
     AsyncWebServer m_webserver;
     AsyncWebSocket m_websocket;

RotaxMonitor/unpacked_fs/config.json

@@ -1,3 +0,0 @@
-{
-    
-}

RotaxMonitor/unpacked_fs/index.html

@@ -1,188 +0,0 @@
-<!DOCTYPE html>
-<html>
-
-<head>
-    <meta charset="UTF-8">
-    <title>Astro Rotax Monitor</title>
-    <link rel="stylesheet" href="style.css">
-</head>
-
-<body>
-    <header class="page-header">
-        <div class="header-content">
-            <img src="logo_astro_dev.svg" alt="Astro Tecnologie" class="logo">
-        </div>
-        <div>
-
-            <h1>Rotax Ignition Box Monitor</h1>
-        </div>
-    </header>
-
-    <div id="loadingIndicator" class="loading-indicator">
-        <span class="spinner"></span> Waiting for data...
-    </div>
-
-    <div class="tables-container">
-        <div class="box">
-            <h2>Box_A</h2>
-            <div class="box-data">
-                <p><strong>Timestamp:</strong> <span id="a_timestamp">-</span></p>
-                <p><strong>Data Valid:</strong> <span id="a_datavalid">-</span></p>
-                <p><strong>Generator voltage:</strong> <span id="a_volts_gen">-</span></p>
-                <p><strong>ADC read time:</strong> <span id="a_adc_read_time">-</span></p>
-                <p><strong>Queue errors:</strong> <span id="a_n_queue_errors">-</span></p>
-            </div>
-            <div class="rpm-highlight">
-                <strong>Engine RPM:</strong> <span id="a_eng_rpm">-</span>
-            </div>
-            <table>
-                <thead>
-                    <tr>
-                        <th>Property</th>
-                        <th>Pickup 12</th>
-                        <th>Pickup 34</th>
-                    </tr>
-                </thead>
-                <tbody>
-                    <tr>
-                        <td>Spark delay</td>
-                        <td id="a_coils12_spark_delay">-</td>
-                        <td id="a_coils34_spark_delay">-</td>
-                    </tr>
-                    <tr>
-                        <td>Spark status</td>
-                        <td id="a_coils12_spark_status">-</td>
-                        <td id="a_coils34_spark_status">-</td>
-                    </tr>
-                    <tr>
-                        <td>Soft start status</td>
-                        <td id="a_coils12_sstart_status">-</td>
-                        <td id="a_coils34_sstart_status">-</td>
-                    </tr>
-                    <tr>
-                        <td>Peak P in</td>
-                        <td id="a_coils12_peak_p_in">-</td>
-                        <td id="a_coils34_peak_p_in">-</td>
-                    </tr>
-                    <tr>
-                        <td>Peak N in</td>
-                        <td id="a_coils12_peak_n_in">-</td>
-                        <td id="a_coils34_peak_n_in">-</td>
-                    </tr>
-                    <tr>
-                        <td>Peak P out</td>
-                        <td id="a_coils12_peak_p_out">-</td>
-                        <td id="a_coils34_peak_p_out">-</td>
-                    </tr>
-                    <tr>
-                        <td>Peak N out</td>
-                        <td id="a_coils12_peak_n_out">-</td>
-                        <td id="a_coils34_peak_n_out">-</td>
-                    </tr>
-                    <tr>
-                        <td>Level spark</td>
-                        <td id="a_coils12_level_spark">-</td>
-                        <td id="a_coils34_level_spark">-</td>
-                    </tr>
-                    <tr>
-                        <td>Spark Events</td>
-                        <td id="a_coils12_n_events">-</td>
-                        <td id="a_coils34_n_events">-</td>
-                    </tr>
-                    <tr>
-                        <td>Missed Events</td>
-                        <td id="a_coils12_n_missed_firing">-</td>
-                        <td id="a_coils34_n_missed_firing">-</td>
-                    </tr>
-                </tbody>
-            </table>
-        </div>
-
-        <div class="box">
-            <h2>Box_B</h2>
-            <div class="box-data">
-                <p><strong>Timestamp:</strong> <span id="b_timestamp">-</span></p>
-                <p><strong>Data Valid:</strong> <span id="b_datavalid">-</span></p>
-                <p><strong>Generator voltage:</strong> <span id="b_volts_gen">-</span></p>
-                <p><strong>ADC read time:</strong> <span id="b_adc_read_time">-</span></p>
-                <p><strong>Queue errors:</strong> <span id="b_n_queue_errors">-</span></p>
-            </div>
-            <div class="rpm-highlight">
-                <strong>Engine RPM:</strong> <span id="b_eng_rpm">-</span>
-            </div>
-            <table>
-                <thead>
-                    <tr>
-                        <th>Property</th>
-                        <th>Pickup 12</th>
-                        <th>Pickup 34</th>
-                    </tr>
-                </thead>
-                <tbody>
-                    <tr>
-                        <td>Spark delay</td>
-                        <td id="b_coils12_spark_delay">-</td>
-                        <td id="b_coils34_spark_delay">-</td>
-                    </tr>
-                    <tr>
-                        <td>Spark status</td>
-                        <td id="b_coils12_spark_status">-</td>
-                        <td id="b_coils34_spark_status">-</td>
-                    </tr>
-                    <tr>
-                        <td>Soft start status</td>
-                        <td id="b_coils12_sstart_status">-</td>
-                        <td id="b_coils34_sstart_status">-</td>
-                    </tr>
-                    <tr>
-                        <td>Peak P in</td>
-                        <td id="b_coils12_peak_p_in">-</td>
-                        <td id="b_coils34_peak_p_in">-</td>
-                    </tr>
-                    <tr>
-                        <td>Peak N in</td>
-                        <td id="b_coils12_peak_n_in">-</td>
-                        <td id="b_coils34_peak_n_in">-</td>
-                    </tr>
-                    <tr>
-                        <td>Peak P out</td>
-                        <td id="b_coils12_peak_p_out">-</td>
-                        <td id="b_coils34_peak_p_out">-</td>
-                    </tr>
-                    <tr>
-                        <td>Peak N out</td>
-                        <td id="b_coils12_peak_n_out">-</td>
-                        <td id="b_coils34_peak_n_out">-</td>
-                    </tr>
-                    <tr>
-                        <td>Level spark</td>
-                        <td id="b_coils12_level_spark">-</td>
-                        <td id="b_coils34_level_spark">-</td>
-                    </tr>
-                    <tr>
-                        <td>Spark Events</td>
-                        <td id="b_coils12_n_events">-</td>
-                        <td id="b_coils34_n_events">-</td>
-                    </tr>
-                    <tr>
-                        <td>Missed Events</td>
-                        <td id="b_coils12_n_missed_firing">-</td>
-                        <td id="b_coils34_n_missed_firing">-</td>
-                    </tr>
-                </tbody>
-            </table>
-        </div>
-    </div>
-
-    <div class="upload-section">
-        <h3>Upload file to Flash</h3>
-        <p>Select a file and upload it to Flash.</p>
-        <input type="file" id="littlefsFile">
-        <button onclick="uploadLittleFS()">Upload</button>
-        <div id="uploadStatus" class="upload-status">No file uploaded yet.</div>
-    </div>
-
-    <script src="script.js"></script>
-</body>
-
-</html>

RotaxMonitor/unpacked_fs/logo_astro_dev.svg

@@ -1,306 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Generator: Adobe Illustrator 26.0.1, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
-<svg version="1.1" id="e_astro_logo_negativo" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"
-	 x="0px" y="0px" viewBox="0 0 374 56" style="enable-background:new 0 0 374 56;" xml:space="preserve">
-<style type="text/css">
-	.st0{fill:#FFFFFF;}
-</style>
-<g>
-	<polygon class="st0" points="53.9,46 59.2,46 59.2,44.8 55.3,44.8 55.3,42.4 59,42.4 59,41.2 55.3,41.2 55.3,38.8 59.2,38.8 
-		59.2,37.6 53.9,37.6 	"/>
-	<rect x="61.5" y="37.1" class="st0" width="1.4" height="8.9"/>
-	<path class="st0" d="M70.3,41.8c-0.1-0.4-0.2-0.8-0.4-1.2c-0.2-0.3-0.5-0.6-0.9-0.8c-0.4-0.2-0.8-0.3-1.3-0.3c-0.5,0-1,0.1-1.5,0.4
-		c-0.4,0.3-0.8,0.6-1.1,1.1c-0.3,0.5-0.4,1.1-0.4,1.8c0,0.7,0.1,1.2,0.4,1.7c0.3,0.5,0.6,0.9,1.1,1.2c0.4,0.3,0.9,0.4,1.5,0.4
-		c0.5,0,0.9-0.1,1.3-0.3c0.4-0.2,0.7-0.4,0.9-0.7c0.2-0.3,0.4-0.7,0.5-1.1h-1.4c-0.1,0.3-0.2,0.5-0.4,0.7c-0.2,0.2-0.5,0.2-0.8,0.2
-		c-0.3,0-0.6-0.1-0.9-0.3c-0.2-0.2-0.4-0.4-0.5-0.7c-0.1-0.3-0.2-0.6-0.2-1h4.2C70.4,42.6,70.4,42.2,70.3,41.8z M66.2,42.3
-		c0-0.3,0.1-0.5,0.2-0.8c0.1-0.3,0.3-0.5,0.5-0.7c0.2-0.2,0.5-0.3,0.9-0.3c0.3,0,0.5,0.1,0.7,0.2c0.2,0.1,0.3,0.3,0.4,0.4
-		c0.1,0.2,0.2,0.4,0.2,0.6c0,0.2,0,0.3,0,0.5H66.2z"/>
-	<path class="st0" d="M73.8,41c0.2-0.1,0.5-0.2,0.7-0.2c0.3,0,0.6,0.1,0.8,0.3c0.2,0.2,0.4,0.4,0.4,0.7l1.4-0.1
-		c0-0.3-0.1-0.5-0.3-0.8c-0.1-0.3-0.3-0.5-0.5-0.7c-0.2-0.2-0.5-0.4-0.8-0.5c-0.3-0.1-0.7-0.2-1.1-0.2c-0.5,0-1,0.1-1.5,0.4
-		c-0.4,0.3-0.8,0.6-1.1,1.1c-0.3,0.5-0.4,1.1-0.4,1.8c0,0.7,0.1,1.3,0.4,1.8c0.3,0.5,0.6,0.9,1.1,1.2c0.5,0.3,0.9,0.4,1.5,0.4
-		c0.6,0,1-0.1,1.4-0.3c0.4-0.2,0.7-0.5,0.9-0.9c0.2-0.4,0.3-0.8,0.3-1.2h-1.4c0,0.3-0.1,0.6-0.3,0.8c-0.2,0.2-0.5,0.3-0.9,0.3
-		c-0.3,0-0.5-0.1-0.8-0.2c-0.2-0.2-0.4-0.4-0.6-0.7c-0.1-0.3-0.2-0.7-0.2-1.1c0-0.5,0.1-0.9,0.2-1.2C73.4,41.4,73.6,41.1,73.8,41z"
-		/>
-	<path class="st0" d="M81.8,45c-0.2,0-0.3,0.1-0.5,0.1c-0.5,0-0.8-0.3-0.8-0.8v-3.6h1.8v-0.9h-1.8V38h-1.4v1.7h-0.9v0.9h0.9v3.7
-		c0,0.4,0.1,0.8,0.3,1.1c0.2,0.3,0.4,0.5,0.7,0.6c0.3,0.1,0.6,0.2,1,0.2c0.2,0,0.5,0,0.7-0.1c0.2-0.1,0.5-0.1,0.7-0.2l-0.2-1
-		C82.2,44.9,82,45,81.8,45z"/>
-	<path class="st0" d="M87.3,39.6c-0.4,0-0.7,0.1-1.1,0.4c-0.3,0.2-0.5,0.6-0.6,1v-1.3h-1.4V46h1.4v-2.8h0c0-0.5,0.1-0.9,0.2-1.2
-		c0.1-0.3,0.3-0.6,0.5-0.8c0.2-0.2,0.5-0.3,0.9-0.3c0.1,0,0.2,0,0.4,0c0.1,0,0.3,0,0.4,0.1l0-1.4c-0.1,0-0.2-0.1-0.3-0.1
-		C87.5,39.6,87.4,39.6,87.3,39.6z"/>
-	<path class="st0" d="M93.1,39.9c-0.5-0.2-1-0.4-1.5-0.4c-0.6,0-1.1,0.1-1.5,0.4c-0.5,0.2-0.8,0.6-1.1,1.1c-0.3,0.5-0.4,1.1-0.4,1.9
-		c0,0.7,0.1,1.3,0.4,1.8c0.3,0.5,0.6,0.9,1.1,1.1c0.5,0.2,1,0.4,1.5,0.4c0.6,0,1.1-0.1,1.5-0.4c0.5-0.2,0.8-0.6,1.1-1.1
-		c0.3-0.5,0.4-1.1,0.4-1.8c0-0.7-0.1-1.4-0.4-1.9C94,40.5,93.6,40.1,93.1,39.9z M93,44c-0.1,0.3-0.3,0.6-0.6,0.7
-		c-0.3,0.2-0.5,0.2-0.9,0.2c-0.5,0-0.9-0.2-1.2-0.5C90.1,44,90,43.5,90,42.9c0-0.5,0.1-0.9,0.2-1.2c0.1-0.3,0.3-0.6,0.6-0.7
-		c0.3-0.2,0.5-0.2,0.9-0.2c0.5,0,0.9,0.2,1.2,0.5c0.3,0.4,0.4,0.9,0.4,1.6C93.2,43.3,93.2,43.7,93,44z"/>
-	<path class="st0" d="M101.2,39.9c-0.4-0.2-0.8-0.3-1.3-0.3c-0.5,0-1,0.1-1.3,0.4c-0.3,0.2-0.5,0.5-0.7,0.9l-0.2-1.1h-1.2V46h1.4
-		v-2.9c0-0.5,0.1-0.9,0.2-1.3c0.1-0.4,0.3-0.6,0.6-0.8c0.2-0.2,0.5-0.3,0.9-0.3c0.4,0,0.7,0.1,1,0.4c0.2,0.3,0.4,0.6,0.4,1.2V46h1.4
-		v-3.7c0-0.6-0.1-1.1-0.3-1.5C101.8,40.4,101.5,40.1,101.2,39.9z"/>
-	<rect x="104.7" y="39.7" class="st0" width="1.4" height="6.3"/>
-	<path class="st0" d="M105.4,36.8c-0.3,0-0.5,0.1-0.6,0.2c-0.2,0.1-0.2,0.3-0.2,0.6c0,0.3,0.1,0.5,0.2,0.6c0.2,0.1,0.4,0.2,0.6,0.2
-		c0.3,0,0.5-0.1,0.6-0.2c0.2-0.1,0.2-0.4,0.2-0.6c0-0.2-0.1-0.4-0.2-0.6C105.9,36.9,105.6,36.8,105.4,36.8z"/>
-	<path class="st0" d="M110.3,41c0.2-0.1,0.5-0.2,0.7-0.2c0.3,0,0.6,0.1,0.8,0.3c0.2,0.2,0.4,0.4,0.4,0.7l1.4-0.1
-		c0-0.3-0.1-0.5-0.3-0.8c-0.1-0.3-0.3-0.5-0.5-0.7c-0.2-0.2-0.5-0.4-0.8-0.5c-0.3-0.1-0.7-0.2-1.1-0.2c-0.5,0-1,0.1-1.5,0.4
-		c-0.5,0.3-0.8,0.6-1.1,1.1c-0.3,0.5-0.4,1.1-0.4,1.8c0,0.7,0.1,1.3,0.4,1.8c0.3,0.5,0.6,0.9,1.1,1.2c0.4,0.3,0.9,0.4,1.5,0.4
-		c0.6,0,1-0.1,1.4-0.3c0.4-0.2,0.7-0.5,0.9-0.9c0.2-0.4,0.3-0.8,0.3-1.2h-1.4c0,0.3-0.1,0.6-0.3,0.8c-0.2,0.2-0.5,0.3-0.9,0.3
-		c-0.3,0-0.5-0.1-0.8-0.2c-0.2-0.2-0.4-0.4-0.6-0.7c-0.1-0.3-0.2-0.7-0.2-1.1c0-0.5,0.1-0.9,0.2-1.2C109.9,41.4,110.1,41.1,110.3,41
-		z"/>
-	<path class="st0" d="M123.7,38.1c-0.6-0.3-1.4-0.5-2.2-0.5h-2.6V46h2.6c0.9,0,1.6-0.2,2.2-0.5c0.6-0.3,1.1-0.8,1.5-1.5
-		c0.4-0.6,0.5-1.4,0.5-2.2c0-0.9-0.2-1.6-0.5-2.2C124.9,38.9,124.4,38.5,123.7,38.1z M123.9,43.3c-0.2,0.4-0.5,0.8-1,1.1
-		c-0.4,0.3-0.9,0.4-1.5,0.4h-1.3v-5.9h1.3c0.6,0,1.1,0.1,1.5,0.4c0.4,0.3,0.7,0.6,1,1c0.2,0.4,0.3,1,0.3,1.5
-		C124.2,42.4,124.1,42.9,123.9,43.3z"/>
-	<path class="st0" d="M132.6,41.8c-0.1-0.4-0.2-0.8-0.4-1.2c-0.2-0.3-0.5-0.6-0.9-0.8c-0.4-0.2-0.8-0.3-1.3-0.3
-		c-0.5,0-1,0.1-1.5,0.4c-0.4,0.3-0.8,0.6-1.1,1.1c-0.3,0.5-0.4,1.1-0.4,1.8c0,0.7,0.1,1.2,0.4,1.7c0.3,0.5,0.6,0.9,1.1,1.2
-		c0.4,0.3,0.9,0.4,1.5,0.4c0.5,0,0.9-0.1,1.3-0.3c0.4-0.2,0.7-0.4,0.9-0.7c0.2-0.3,0.4-0.7,0.5-1.1h-1.4c-0.1,0.3-0.2,0.5-0.4,0.7
-		c-0.2,0.2-0.5,0.2-0.8,0.2c-0.3,0-0.6-0.1-0.9-0.3c-0.2-0.2-0.4-0.4-0.5-0.7c-0.1-0.3-0.2-0.6-0.2-1h4.2
-		C132.7,42.6,132.7,42.2,132.6,41.8z M128.5,42.3c0-0.3,0.1-0.5,0.2-0.8c0.1-0.3,0.3-0.5,0.5-0.7c0.2-0.2,0.5-0.3,0.9-0.3
-		c0.3,0,0.5,0.1,0.7,0.2c0.2,0.1,0.3,0.3,0.4,0.4c0.1,0.2,0.2,0.4,0.2,0.6c0,0.2,0,0.3,0,0.5H128.5z"/>
-	<path class="st0" d="M137.9,42.6l-1.4-0.5c-0.6-0.2-0.9-0.4-0.9-0.8c0-0.2,0.1-0.4,0.3-0.5c0.2-0.1,0.5-0.2,0.8-0.2
-		c0.4,0,0.7,0.1,0.9,0.2c0.2,0.1,0.3,0.3,0.3,0.5h1.3c0-0.5-0.2-1-0.7-1.3c-0.4-0.3-1.1-0.5-1.9-0.5c-0.8,0-1.4,0.2-1.9,0.5
-		c-0.5,0.3-0.7,0.7-0.7,1.3c0,0.4,0.1,0.8,0.4,1c0.3,0.3,0.7,0.5,1.2,0.7l1.3,0.5c0.3,0.1,0.5,0.2,0.7,0.3c0.1,0.1,0.2,0.3,0.2,0.5
-		c0,0.2-0.1,0.3-0.2,0.4c-0.1,0.1-0.3,0.2-0.4,0.3c-0.2,0.1-0.4,0.1-0.6,0.1c-0.4,0-0.8-0.1-1-0.2c-0.3-0.2-0.4-0.4-0.4-0.7H134
-		c0,0.4,0.1,0.8,0.4,1.1c0.2,0.3,0.6,0.6,1,0.7c0.4,0.2,0.9,0.3,1.6,0.3c0.5,0,1-0.1,1.4-0.3c0.4-0.2,0.7-0.4,0.9-0.7
-		c0.2-0.3,0.3-0.6,0.3-0.9c0-0.4-0.1-0.7-0.4-1C138.8,43,138.4,42.8,137.9,42.6z"/>
-	<rect x="141.6" y="39.7" class="st0" width="1.4" height="6.3"/>
-	<path class="st0" d="M142.3,36.8c-0.3,0-0.5,0.1-0.6,0.2c-0.2,0.1-0.2,0.3-0.2,0.6c0,0.3,0.1,0.5,0.2,0.6c0.2,0.1,0.4,0.2,0.6,0.2
-		c0.3,0,0.5-0.1,0.6-0.2c0.2-0.1,0.2-0.4,0.2-0.6c0-0.2-0.1-0.4-0.2-0.6C142.7,36.9,142.5,36.8,142.3,36.8z"/>
-	<path class="st0" d="M151.1,45.5c-0.4-0.2-0.9-0.4-1.5-0.4h-2.2c-0.4,0-0.7-0.1-0.8-0.2c-0.2-0.1-0.2-0.3-0.2-0.4
-		c0-0.2,0-0.3,0.1-0.4c0.1-0.1,0.2-0.2,0.3-0.2c0.1,0,0.1,0,0.2,0c0.4,0.1,0.7,0.2,1.2,0.2c0.5,0,0.9-0.1,1.3-0.3
-		c0.4-0.2,0.7-0.5,1-0.8c0.2-0.3,0.4-0.7,0.4-1.2c0-0.5-0.1-0.9-0.4-1.2c0,0-0.1-0.1-0.1-0.1c0-0.3,0.1-0.5,0.3-0.6
-		c0.2-0.1,0.5-0.2,0.9-0.2l0.1-1.3c-0.4,0-0.7,0.1-1,0.2c-0.3,0.2-0.5,0.4-0.7,0.7c-0.1,0.2-0.2,0.5-0.2,0.8
-		c-0.1-0.1-0.2-0.1-0.2-0.2c-0.4-0.2-0.8-0.3-1.3-0.3c-0.5,0-0.9,0.1-1.4,0.3c-0.4,0.2-0.7,0.5-1,0.8c-0.2,0.3-0.4,0.7-0.4,1.2
-		c0,0.5,0.1,0.9,0.4,1.2c0.1,0.2,0.3,0.3,0.4,0.4c-0.1,0-0.2,0-0.2,0.1c-0.3,0.1-0.4,0.2-0.6,0.4c-0.1,0.2-0.2,0.4-0.2,0.7
-		c0,0.3,0.1,0.5,0.3,0.7c0.1,0.2,0.3,0.3,0.5,0.4c-0.3,0.1-0.6,0.1-0.8,0.3c-0.3,0.2-0.5,0.6-0.5,1.1c0,0.4,0.1,0.7,0.4,1
-		c0.3,0.3,0.7,0.6,1.2,0.8c0.5,0.2,1.1,0.3,1.8,0.3c0.8,0,1.4-0.1,2-0.4c0.5-0.3,1-0.6,1.3-1c0.3-0.4,0.4-0.8,0.4-1.3
-		C151.7,46.1,151.5,45.8,151.1,45.5z M147.1,40.9c0.2-0.2,0.5-0.4,1-0.4c0.4,0,0.7,0.1,1,0.4c0.2,0.2,0.3,0.6,0.3,0.9
-		c0,0.4-0.1,0.7-0.3,0.9c-0.2,0.3-0.5,0.4-1,0.4c-0.4,0-0.7-0.1-1-0.4c-0.2-0.3-0.3-0.6-0.3-0.9C146.8,41.4,146.9,41.1,147.1,40.9z
-		 M150,47.4c-0.2,0.2-0.5,0.4-0.8,0.5c-0.3,0.1-0.7,0.2-1.2,0.2c-0.6,0-1.1-0.1-1.5-0.3c-0.4-0.2-0.5-0.4-0.5-0.8
-		c0-0.3,0.1-0.5,0.4-0.7c0.2-0.2,0.6-0.3,1-0.3h2.2c0.2,0,0.4,0.1,0.5,0.2c0.1,0.1,0.2,0.3,0.2,0.4C150.3,47,150.2,47.2,150,47.4z"
-		/>
-	<path class="st0" d="M157.9,39.9c-0.3-0.2-0.8-0.3-1.3-0.3c-0.5,0-1,0.1-1.3,0.4c-0.3,0.2-0.5,0.5-0.7,0.9l-0.2-1.1h-1.2V46h1.4
-		v-2.9c0-0.5,0.1-0.9,0.2-1.3c0.1-0.4,0.3-0.6,0.6-0.8c0.2-0.2,0.5-0.3,0.9-0.3c0.4,0,0.7,0.1,1,0.4c0.2,0.3,0.4,0.6,0.4,1.2V46h1.4
-		v-3.7c0-0.6-0.1-1.1-0.3-1.5C158.5,40.4,158.2,40.1,157.9,39.9z"/>
-	<path class="st0" d="M166.7,37c-0.3,0-0.7,0.1-0.9,0.2c-0.3,0.1-0.5,0.3-0.7,0.6c-0.2,0.3-0.3,0.6-0.3,1.1v0.8h-1v0.9h1V46h1.4
-		v-5.4h1.2v-0.9h-1.2v-0.8c0-0.2,0-0.4,0.1-0.5c0.1-0.1,0.2-0.2,0.3-0.3c0.1,0,0.2-0.1,0.4-0.1c0.1,0,0.2,0,0.3,0
-		c0.1,0,0.2,0.1,0.3,0.1l0.3-1.1c-0.2,0-0.4-0.1-0.6-0.1C167.1,37,166.9,37,166.7,37z"/>
-	<path class="st0" d="M173.1,39.9c-0.5-0.2-1-0.4-1.5-0.4c-0.6,0-1.1,0.1-1.5,0.4c-0.5,0.2-0.8,0.6-1.1,1.1
-		c-0.3,0.5-0.4,1.1-0.4,1.9c0,0.7,0.1,1.3,0.4,1.8c0.3,0.5,0.6,0.9,1.1,1.1c0.5,0.2,1,0.4,1.5,0.4c0.6,0,1.1-0.1,1.5-0.4
-		c0.5-0.2,0.8-0.6,1.1-1.1c0.3-0.5,0.4-1.1,0.4-1.8c0-0.7-0.1-1.4-0.4-1.9C173.9,40.5,173.6,40.1,173.1,39.9z M173,44
-		c-0.1,0.3-0.3,0.6-0.6,0.7c-0.3,0.2-0.5,0.2-0.9,0.2c-0.5,0-0.9-0.2-1.2-0.5c-0.3-0.4-0.4-0.9-0.4-1.6c0-0.5,0.1-0.9,0.2-1.2
-		c0.1-0.3,0.3-0.6,0.6-0.7c0.3-0.2,0.5-0.2,0.9-0.2c0.5,0,0.9,0.2,1.2,0.5c0.3,0.4,0.4,0.9,0.4,1.6C173.2,43.3,173.2,43.7,173,44z"
-		/>
-	<path class="st0" d="M179.6,39.6c-0.4,0-0.7,0.1-1.1,0.4c-0.3,0.2-0.5,0.6-0.6,1v-1.3h-1.4V46h1.4v-2.8h0c0-0.5,0.1-0.9,0.2-1.2
-		c0.1-0.3,0.3-0.6,0.5-0.8c0.2-0.2,0.5-0.3,0.9-0.3c0.1,0,0.2,0,0.4,0c0.1,0,0.3,0,0.4,0.1l0-1.4c-0.1,0-0.2-0.1-0.3-0.1
-		C179.8,39.6,179.7,39.6,179.6,39.6z"/>
-	<path class="st0" d="M188.9,41.4l-1.8-0.7c-0.4-0.1-0.6-0.3-0.8-0.4c-0.2-0.1-0.3-0.4-0.3-0.6c0-0.3,0.1-0.5,0.4-0.7
-		c0.3-0.2,0.6-0.3,1.1-0.3c0.5,0,0.9,0.1,1.1,0.3c0.3,0.2,0.4,0.5,0.5,0.8h1.4c-0.1-0.7-0.4-1.3-0.9-1.8c-0.5-0.4-1.2-0.6-2.1-0.6
-		c-1,0-1.7,0.2-2.2,0.6c-0.5,0.4-0.8,1-0.8,1.6c0,0.6,0.2,1.1,0.5,1.4c0.3,0.3,0.9,0.6,1.5,0.9l1.6,0.6c0.4,0.1,0.7,0.3,0.9,0.5
-		c0.2,0.2,0.3,0.4,0.3,0.7c0,0.2-0.1,0.4-0.2,0.6c-0.1,0.2-0.3,0.3-0.6,0.4c-0.3,0.1-0.6,0.1-0.9,0.1c-0.3,0-0.6-0.1-0.9-0.2
-		c-0.3-0.1-0.5-0.3-0.7-0.5c-0.2-0.2-0.3-0.5-0.3-0.8h-1.4c0,0.6,0.2,1.1,0.5,1.6c0.3,0.4,0.7,0.7,1.2,0.9c0.5,0.2,1,0.3,1.6,0.3
-		c0.7,0,1.3-0.1,1.8-0.3c0.5-0.2,0.8-0.5,1.1-0.9c0.3-0.4,0.4-0.8,0.4-1.3c0-0.6-0.2-1-0.5-1.4C190,42,189.5,41.7,188.9,41.4z"/>
-	<path class="st0" d="M197.5,39.9c-0.4-0.3-0.9-0.4-1.4-0.4c-0.4,0-0.8,0.1-1.1,0.3c-0.3,0.2-0.5,0.4-0.7,0.8l-0.1-0.9h-1.1v9.4h1.4
-		v-3.7c0.1,0.2,0.3,0.3,0.5,0.5c0.3,0.2,0.7,0.3,1.2,0.3c0.5,0,1-0.1,1.4-0.4c0.4-0.3,0.8-0.6,1.1-1.1c0.3-0.5,0.4-1.1,0.4-1.8
-		c0-0.7-0.1-1.3-0.4-1.8C198.3,40.6,197.9,40.2,197.5,39.9z M197.3,44c-0.2,0.3-0.4,0.5-0.6,0.7c-0.3,0.2-0.5,0.2-0.8,0.2
-		c-0.3,0-0.5-0.1-0.7-0.2c-0.2-0.1-0.4-0.3-0.6-0.5c-0.1-0.2-0.2-0.5-0.2-0.8v-1.1c0-0.3,0.1-0.6,0.2-0.9c0.1-0.2,0.3-0.4,0.6-0.5
-		c0.2-0.1,0.5-0.2,0.8-0.2c0.3,0,0.6,0.1,0.9,0.2c0.3,0.2,0.5,0.4,0.6,0.7c0.1,0.3,0.2,0.7,0.2,1.1C197.5,43.3,197.4,43.7,197.3,44z
-		"/>
-	<path class="st0" d="M205.7,41.8c-0.1-0.4-0.2-0.8-0.4-1.2c-0.2-0.3-0.5-0.6-0.9-0.8c-0.4-0.2-0.8-0.3-1.3-0.3
-		c-0.5,0-1,0.1-1.5,0.4c-0.4,0.3-0.8,0.6-1.1,1.1c-0.3,0.5-0.4,1.1-0.4,1.8c0,0.7,0.1,1.2,0.4,1.7c0.3,0.5,0.6,0.9,1.1,1.2
-		c0.4,0.3,0.9,0.4,1.5,0.4c0.5,0,0.9-0.1,1.3-0.3c0.4-0.2,0.7-0.4,0.9-0.7c0.2-0.3,0.4-0.7,0.5-1.1h-1.4c-0.1,0.3-0.2,0.5-0.4,0.7
-		c-0.2,0.2-0.5,0.2-0.8,0.2c-0.3,0-0.6-0.1-0.9-0.3c-0.2-0.2-0.4-0.4-0.5-0.7c-0.1-0.3-0.2-0.6-0.2-1h4.2
-		C205.8,42.6,205.8,42.2,205.7,41.8z M201.6,42.3c0-0.3,0.1-0.5,0.2-0.8c0.1-0.3,0.3-0.5,0.5-0.7c0.2-0.2,0.5-0.3,0.9-0.3
-		c0.3,0,0.5,0.1,0.7,0.2c0.2,0.1,0.3,0.3,0.4,0.4c0.1,0.2,0.2,0.4,0.2,0.6c0,0.2,0,0.3,0,0.5H201.6z"/>
-	<path class="st0" d="M209.3,41c0.2-0.1,0.5-0.2,0.7-0.2c0.3,0,0.6,0.1,0.8,0.3c0.2,0.2,0.4,0.4,0.4,0.7l1.4-0.1
-		c0-0.3-0.1-0.5-0.3-0.8c-0.1-0.3-0.3-0.5-0.5-0.7c-0.2-0.2-0.5-0.4-0.8-0.5c-0.3-0.1-0.7-0.2-1.1-0.2c-0.5,0-1,0.1-1.5,0.4
-		c-0.5,0.3-0.8,0.6-1.1,1.1c-0.3,0.5-0.4,1.1-0.4,1.8c0,0.7,0.1,1.3,0.4,1.8c0.3,0.5,0.6,0.9,1.1,1.2c0.4,0.3,0.9,0.4,1.5,0.4
-		c0.6,0,1-0.1,1.4-0.3c0.4-0.2,0.7-0.5,0.9-0.9c0.2-0.4,0.3-0.8,0.3-1.2h-1.4c0,0.3-0.1,0.6-0.3,0.8c-0.2,0.2-0.5,0.3-0.9,0.3
-		c-0.3,0-0.5-0.1-0.8-0.2c-0.2-0.2-0.4-0.4-0.6-0.7c-0.1-0.3-0.2-0.7-0.2-1.1c0-0.5,0.1-0.9,0.2-1.2C208.8,41.4,209,41.1,209.3,41z"
-		/>
-	<path class="st0" d="M215.3,36.8c-0.3,0-0.5,0.1-0.6,0.2c-0.2,0.1-0.2,0.3-0.2,0.6c0,0.3,0.1,0.5,0.2,0.6c0.2,0.1,0.4,0.2,0.6,0.2
-		c0.3,0,0.5-0.1,0.6-0.2c0.2-0.1,0.2-0.4,0.2-0.6c0-0.2-0.1-0.4-0.2-0.6C215.8,36.9,215.6,36.8,215.3,36.8z"/>
-	<rect x="214.6" y="39.7" class="st0" width="1.4" height="6.3"/>
-	<path class="st0" d="M222.6,39.8c-0.4-0.2-0.9-0.3-1.4-0.3c-0.6,0-1.1,0.1-1.5,0.2c-0.4,0.1-0.7,0.4-1,0.6
-		c-0.2,0.3-0.3,0.7-0.3,1.2h1.5c0-0.2,0.1-0.4,0.2-0.5c0.1-0.1,0.3-0.3,0.5-0.3c0.2-0.1,0.4-0.1,0.7-0.1c0.4,0,0.8,0.1,1,0.3
-		c0.2,0.2,0.3,0.6,0.3,1.1v0.7c-0.3-0.1-0.5-0.1-0.8-0.2c-0.3-0.1-0.6-0.1-1-0.1c-0.5,0-0.9,0.1-1.3,0.2c-0.4,0.1-0.7,0.3-0.9,0.6
-		c-0.2,0.3-0.3,0.6-0.3,1c0,0.3,0.1,0.7,0.3,1c0.2,0.3,0.4,0.6,0.8,0.7c0.4,0.2,0.8,0.3,1.3,0.3c0.5,0,0.9-0.1,1.2-0.3
-		c0.3-0.2,0.6-0.5,0.7-0.9l0.1,1h1.2v-4c0-0.6-0.1-1-0.3-1.4C223.3,40.2,223,39.9,222.6,39.8z M222.5,43.7c0,0.2-0.1,0.4-0.2,0.7
-		c-0.1,0.2-0.3,0.4-0.5,0.5c-0.2,0.1-0.5,0.2-0.8,0.2c-0.4,0-0.8-0.1-1-0.3c-0.2-0.2-0.3-0.4-0.3-0.7c0-0.3,0.1-0.6,0.4-0.7
-		c0.2-0.1,0.6-0.2,0.9-0.2c0.3,0,0.5,0,0.8,0.1c0.2,0,0.5,0.1,0.7,0.2V43.7z"/>
-	<rect x="226.2" y="37.1" class="st0" width="1.4" height="8.9"/>
-	<polygon class="st0" points="233.3,46 238.7,46 238.7,44.8 234.7,44.8 234.7,42.4 238.4,42.4 238.4,41.2 234.7,41.2 234.7,38.8 
-		238.7,38.8 238.7,37.6 233.3,37.6 	"/>
-	<path class="st0" d="M246.4,47.6c-0.1-0.2-0.1-0.4-0.1-0.6v-7.3h-0.9l-0.3,1c-0.2-0.4-0.5-0.7-0.8-0.9c-0.3-0.2-0.7-0.3-1.1-0.3
-		c-0.5,0-1,0.1-1.4,0.4c-0.4,0.3-0.8,0.6-1.1,1.1c-0.3,0.5-0.4,1.1-0.4,1.8c0,0.7,0.1,1.3,0.4,1.8c0.3,0.5,0.6,0.9,1.1,1.1
-		c0.4,0.3,0.9,0.4,1.4,0.4c0.5,0,0.8-0.1,1.1-0.3c0.2-0.2,0.4-0.4,0.5-0.8v1.8c0,0.7,0.1,1.2,0.4,1.5c0.3,0.4,0.8,0.6,1.4,0.8l0.4-1
-		c-0.2-0.1-0.4-0.2-0.5-0.2C246.5,47.9,246.4,47.8,246.4,47.6z M244.9,43.4c0,0.3-0.1,0.6-0.2,0.8c-0.1,0.2-0.3,0.4-0.6,0.5
-		c-0.2,0.1-0.5,0.2-0.7,0.2c-0.3,0-0.5-0.1-0.8-0.2c-0.3-0.2-0.5-0.4-0.6-0.7c-0.2-0.3-0.3-0.7-0.3-1.2c0-0.4,0.1-0.8,0.2-1.1
-		c0.1-0.3,0.3-0.6,0.6-0.7c0.3-0.2,0.5-0.2,0.9-0.2c0.3,0,0.5,0.1,0.7,0.2c0.2,0.1,0.4,0.3,0.5,0.5c0.1,0.2,0.2,0.5,0.2,0.9V43.4z"
-		/>
-	<path class="st0" d="M253,42.7c0,0.5-0.1,0.9-0.2,1.2c-0.2,0.3-0.4,0.6-0.6,0.7c-0.3,0.2-0.6,0.3-0.9,0.3c-0.4,0-0.7-0.1-0.9-0.3
-		c-0.2-0.2-0.3-0.6-0.3-1v-3.9h-1.4v4c0,0.6,0.1,1,0.3,1.4c0.2,0.4,0.5,0.6,0.9,0.8c0.4,0.2,0.8,0.2,1.2,0.2c0.5,0,0.9-0.1,1.2-0.4
-		c0.3-0.2,0.5-0.5,0.7-0.9V46h1.4v-6.3H253V42.7z"/>
-	<path class="st0" d="M257.7,36.8c-0.3,0-0.5,0.1-0.6,0.2c-0.2,0.1-0.2,0.3-0.2,0.6c0,0.3,0.1,0.5,0.2,0.6c0.2,0.1,0.4,0.2,0.6,0.2
-		c0.3,0,0.5-0.1,0.6-0.2c0.2-0.1,0.2-0.4,0.2-0.6c0-0.2-0.1-0.4-0.2-0.6C258.2,36.9,258,36.8,257.7,36.8z"/>
-	<rect x="257" y="39.7" class="st0" width="1.4" height="6.3"/>
-	<path class="st0" d="M265.6,39.9c-0.4-0.3-0.9-0.4-1.4-0.4c-0.4,0-0.8,0.1-1.1,0.3c-0.3,0.2-0.5,0.4-0.7,0.8l-0.1-0.9h-1.1v9.4h1.4
-		v-3.7c0.1,0.2,0.3,0.3,0.5,0.5c0.3,0.2,0.7,0.3,1.2,0.3c0.5,0,1-0.1,1.4-0.4c0.4-0.3,0.8-0.6,1.1-1.1c0.3-0.5,0.4-1.1,0.4-1.8
-		c0-0.7-0.1-1.3-0.4-1.8C266.4,40.6,266,40.2,265.6,39.9z M265.4,44c-0.2,0.3-0.4,0.5-0.6,0.7c-0.3,0.2-0.5,0.2-0.8,0.2
-		c-0.3,0-0.5-0.1-0.7-0.2c-0.2-0.1-0.4-0.3-0.6-0.5c-0.1-0.2-0.2-0.5-0.2-0.8v-1.1c0-0.3,0.1-0.6,0.2-0.9c0.1-0.2,0.3-0.4,0.6-0.5
-		c0.2-0.1,0.5-0.2,0.8-0.2c0.3,0,0.6,0.1,0.9,0.2c0.3,0.2,0.5,0.4,0.6,0.7c0.1,0.3,0.2,0.7,0.2,1.1C265.6,43.3,265.6,43.7,265.4,44z
-		"/>
-	<path class="st0" d="M277.9,39.9c-0.3-0.2-0.8-0.3-1.3-0.3c-0.4,0-0.7,0.1-1,0.2c-0.3,0.1-0.6,0.3-0.8,0.6
-		c-0.1,0.2-0.2,0.4-0.3,0.6c0,0,0-0.1,0-0.1c-0.2-0.4-0.4-0.7-0.8-1c-0.4-0.2-0.8-0.3-1.3-0.3c-0.5,0-0.9,0.1-1.2,0.3
-		c-0.3,0.2-0.6,0.5-0.8,1l-0.2-1.1h-1.2V46h1.4v-2.9c0-0.5,0.1-0.9,0.2-1.3c0.1-0.4,0.3-0.6,0.6-0.8c0.2-0.2,0.5-0.3,0.9-0.3
-		c0.4,0,0.7,0.1,1,0.4c0.2,0.3,0.4,0.6,0.4,1.2V46h1.4v-2.9c0-0.8,0.1-1.3,0.4-1.7c0.3-0.4,0.7-0.6,1.2-0.6c0.4,0,0.7,0.1,1,0.4
-		c0.2,0.3,0.4,0.6,0.4,1.2V46h1.4v-3.7c0-0.6-0.1-1.1-0.3-1.5C278.5,40.4,278.3,40.1,277.9,39.9z"/>
-	<path class="st0" d="M286.2,41.8c-0.1-0.4-0.2-0.8-0.4-1.2c-0.2-0.3-0.5-0.6-0.9-0.8c-0.4-0.2-0.8-0.3-1.3-0.3
-		c-0.5,0-1,0.1-1.5,0.4c-0.4,0.3-0.8,0.6-1.1,1.1c-0.3,0.5-0.4,1.1-0.4,1.8c0,0.7,0.1,1.2,0.4,1.7c0.3,0.5,0.6,0.9,1.1,1.2
-		c0.4,0.3,0.9,0.4,1.5,0.4c0.5,0,0.9-0.1,1.3-0.3c0.4-0.2,0.7-0.4,0.9-0.7c0.2-0.3,0.4-0.7,0.5-1.1h-1.4c-0.1,0.3-0.2,0.5-0.4,0.7
-		c-0.2,0.2-0.5,0.2-0.8,0.2c-0.3,0-0.6-0.1-0.9-0.3c-0.2-0.2-0.4-0.4-0.5-0.7c-0.1-0.3-0.2-0.6-0.2-1h4.2
-		C286.3,42.6,286.2,42.2,286.2,41.8z M282,42.3c0-0.3,0.1-0.5,0.2-0.8c0.1-0.3,0.3-0.5,0.5-0.7c0.2-0.2,0.5-0.3,0.9-0.3
-		c0.3,0,0.5,0.1,0.7,0.2c0.2,0.1,0.3,0.3,0.4,0.4c0.1,0.2,0.2,0.4,0.2,0.6c0,0.2,0,0.3,0,0.5H282z"/>
-	<path class="st0" d="M292.8,39.9c-0.3-0.2-0.8-0.3-1.3-0.3c-0.5,0-1,0.1-1.3,0.4c-0.3,0.2-0.5,0.5-0.7,0.9l-0.2-1.1h-1.2V46h1.4
-		v-2.9c0-0.5,0.1-0.9,0.2-1.3c0.1-0.4,0.3-0.6,0.6-0.8c0.2-0.2,0.5-0.3,0.9-0.3c0.4,0,0.7,0.1,1,0.4c0.2,0.3,0.4,0.6,0.4,1.2V46h1.4
-		v-3.7c0-0.6-0.1-1.1-0.3-1.5C293.4,40.4,293.2,40.1,292.8,39.9z"/>
-	<path class="st0" d="M298.9,45c-0.2,0-0.3,0.1-0.5,0.1c-0.5,0-0.8-0.3-0.8-0.8v-3.6h1.8v-0.9h-1.8V38h-1.4v1.7h-0.9v0.9h0.9v3.7
-		c0,0.4,0.1,0.8,0.3,1.1c0.2,0.3,0.4,0.5,0.7,0.6c0.3,0.1,0.6,0.2,1,0.2c0.2,0,0.5,0,0.7-0.1c0.2-0.1,0.5-0.1,0.7-0.2l-0.2-1
-		C299.3,44.9,299.1,45,298.9,45z"/>
-	<path class="st0" d="M58.3,21.7H65l1.3,4h3.1L63.5,8.1h-3.6l-6,17.5H57L58.3,21.7z M61.7,11.6l2.6,7.9h-5.2L61.7,11.6z"/>
-	<path class="st0" d="M80.4,23.1c-0.5,0.2-1.2,0.3-1.9,0.3c-0.7,0-1.3-0.1-1.9-0.3c-0.6-0.2-1.1-0.6-1.4-1c-0.4-0.5-0.5-1.1-0.5-1.8
-		h-2.8c0,1.3,0.4,2.4,1,3.2c0.6,0.9,1.4,1.5,2.4,1.9c1,0.4,2.1,0.6,3.3,0.6c1.4,0,2.7-0.2,3.7-0.6c1-0.4,1.8-1,2.3-1.8
-		c0.5-0.8,0.8-1.7,0.8-2.7c0-1.2-0.4-2.1-1.1-2.9c-0.7-0.8-1.7-1.4-3-1.9l-3.8-1.4c-0.7-0.3-1.3-0.6-1.6-0.9
-		c-0.3-0.3-0.5-0.7-0.5-1.3c0-0.6,0.3-1.1,0.8-1.6c0.6-0.4,1.3-0.6,2.3-0.6c1.1,0,1.9,0.2,2.4,0.6c0.5,0.4,0.9,1,1,1.7h2.8
-		c-0.1-1.6-0.7-2.8-1.8-3.7c-1.1-0.9-2.5-1.3-4.4-1.3c-2,0-3.5,0.4-4.6,1.3c-1.1,0.9-1.7,2-1.7,3.4c0,1.2,0.4,2.2,1.1,2.9
-		c0.7,0.7,1.8,1.3,3.2,1.8l3.4,1.3c0.8,0.3,1.4,0.6,1.8,1c0.4,0.4,0.6,0.9,0.6,1.5c0,0.5-0.2,0.9-0.5,1.2
-		C81.3,22.6,80.9,22.9,80.4,23.1z"/>
-	<polygon class="st0" points="92.7,25.6 95.7,25.6 95.7,10.6 101.2,10.6 101.2,8.1 87.2,8.1 87.2,10.6 92.7,10.6 	"/>
-	<path class="st0" d="M106.8,18.7h2.6l4,6.9h3.8l-4.8-7.2c1-0.2,1.9-0.6,2.5-1.2c1.1-1,1.6-2.2,1.6-3.8c0-1.6-0.5-2.9-1.6-3.9
-		c-1.1-1-2.7-1.5-4.7-1.5h-6.4v17.5h2.9V18.7z M106.8,10.6h3.5c1.1,0,2,0.3,2.6,0.8c0.6,0.6,0.9,1.3,0.9,2.2c0,0.9-0.3,1.6-0.9,2.2
-		c-0.6,0.6-1.5,0.9-2.8,0.9h-3.2V10.6z"/>
-	<path class="st0" d="M123.7,25c1.2,0.7,2.5,1,4.1,1c1.5,0,2.9-0.3,4.1-1c1.2-0.7,2.1-1.7,2.8-3c0.7-1.4,1-3.1,1-5.1
-		c0-2-0.3-3.7-1-5c-0.7-1.3-1.6-2.4-2.8-3c-1.2-0.7-2.5-1-4.1-1c-1.5,0-2.9,0.3-4.1,1c-1.2,0.7-2.1,1.7-2.8,3s-1,3-1,5.1
-		c0,2,0.3,3.7,1,5.1C121.6,23.3,122.5,24.3,123.7,25z M124.2,12.1c0.9-1.1,2-1.7,3.5-1.7c1.5,0,2.7,0.6,3.5,1.7s1.3,2.7,1.3,4.8
-		c0,2.1-0.4,3.7-1.3,4.8c-0.9,1.1-2.1,1.7-3.5,1.7c-1.5,0-2.6-0.6-3.5-1.7c-0.9-1.1-1.3-2.7-1.3-4.8
-		C122.9,14.8,123.4,13.2,124.2,12.1z"/>
-	<polygon class="st0" points="149.4,25.6 152.3,25.6 152.3,10.6 157.8,10.6 157.8,8.1 143.9,8.1 143.9,10.6 149.4,10.6 	"/>
-	<polygon class="st0" points="171.6,23.1 163.4,23.1 163.4,18.1 171.1,18.1 171.1,15.6 163.4,15.6 163.4,10.6 171.6,10.6 171.6,8.1 
-		160.5,8.1 160.5,25.6 171.6,25.6 	"/>
-	<path class="st0" d="M178.6,24.9c1.1,0.7,2.5,1.1,4,1.1c1.4,0,2.7-0.2,3.7-0.7c1-0.5,1.8-1.2,2.4-2.1c0.6-0.9,0.8-2,0.8-3.3h-3.1
-		c0,1-0.3,1.8-1,2.5c-0.7,0.6-1.6,1-2.8,1c-1,0-1.8-0.3-2.4-0.8c-0.7-0.5-1.2-1.3-1.5-2.3c-0.3-1-0.5-2.1-0.5-3.4
-		c0-1.4,0.2-2.6,0.6-3.6c0.4-1,0.9-1.7,1.6-2.1c0.7-0.5,1.4-0.7,2.2-0.7c0.9,0,1.7,0.3,2.4,0.9c0.7,0.6,1.1,1.4,1.5,2.3l3.1-0.6
-		c-0.4-1.6-1.1-2.8-2.2-3.8c-1.1-1-2.7-1.5-4.7-1.5c-1.5,0-2.8,0.3-3.9,1c-1.1,0.7-2,1.7-2.7,3c-0.7,1.3-1,3-1,5
-		c0,1.9,0.3,3.5,0.9,4.9C176.6,23.1,177.5,24.1,178.6,24.9z"/>
-	<polygon class="st0" points="196.3,12.7 204.5,25.6 207.5,25.6 207.5,8.1 204.6,8.1 204.6,20.8 196.6,8.1 193.4,8.1 193.4,25.6 
-		196.3,25.6 	"/>
-	<path class="st0" d="M215.2,25c1.2,0.7,2.5,1,4.1,1c1.5,0,2.9-0.3,4.1-1c1.2-0.7,2.1-1.7,2.8-3c0.7-1.4,1-3.1,1-5.1
-		c0-2-0.3-3.7-1-5c-0.7-1.3-1.6-2.4-2.8-3c-1.2-0.7-2.5-1-4.1-1c-1.5,0-2.9,0.3-4.1,1c-1.2,0.7-2.1,1.7-2.8,3c-0.7,1.3-1,3-1,5.1
-		c0,2,0.3,3.7,1,5.1C213.1,23.3,214,24.3,215.2,25z M215.7,12.1c0.9-1.1,2-1.7,3.5-1.7c1.5,0,2.7,0.6,3.5,1.7
-		c0.9,1.1,1.3,2.7,1.3,4.8c0,2.1-0.4,3.7-1.3,4.8c-0.9,1.1-2.1,1.7-3.5,1.7c-1.5,0-2.6-0.6-3.5-1.7c-0.9-1.1-1.3-2.7-1.3-4.8
-		C214.4,14.8,214.9,13.2,215.7,12.1z"/>
-	<polygon class="st0" points="241.3,23.1 233.9,23.1 233.9,8.1 231,8.1 231,25.6 241.3,25.6 	"/>
-	<path class="st0" d="M246.8,25c1.2,0.7,2.5,1,4.1,1c1.5,0,2.9-0.3,4.1-1c1.2-0.7,2.1-1.7,2.8-3c0.7-1.4,1-3.1,1-5.1
-		c0-2-0.3-3.7-1-5c-0.7-1.3-1.6-2.4-2.8-3c-1.2-0.7-2.5-1-4.1-1c-1.5,0-2.9,0.3-4.1,1c-1.2,0.7-2.1,1.7-2.8,3c-0.7,1.3-1,3-1,5.1
-		c0,2,0.3,3.7,1,5.1C244.7,23.3,245.6,24.3,246.8,25z M247.3,12.1c0.9-1.1,2-1.7,3.5-1.7c1.5,0,2.7,0.6,3.5,1.7
-		c0.9,1.1,1.3,2.7,1.3,4.8c0,2.1-0.4,3.7-1.3,4.8c-0.9,1.1-2.1,1.7-3.5,1.7c-1.5,0-2.6-0.6-3.5-1.7c-0.9-1.1-1.3-2.7-1.3-4.8
-		C246,14.8,246.4,13.2,247.3,12.1z"/>
-	<path class="st0" d="M265.1,24.9c1.2,0.7,2.4,1.1,3.8,1.1c1.2,0,2.1-0.3,2.9-0.9c0.7-0.6,1.2-1.4,1.6-2.4l0.3,2.9h2.4v-8.9h-6.9
-		v1.9l4.1,0.1v0.1c0,1-0.2,1.8-0.5,2.5c-0.4,0.7-0.8,1.2-1.5,1.5c-0.6,0.4-1.3,0.5-2.1,0.5c-0.9,0-1.8-0.3-2.5-0.8
-		c-0.7-0.5-1.3-1.3-1.7-2.2c-0.4-1-0.6-2.1-0.6-3.3c0-1.4,0.2-2.5,0.7-3.5c0.5-1,1.1-1.7,1.8-2.3c0.8-0.5,1.6-0.8,2.5-0.8
-		c0.8,0,1.5,0.2,2.1,0.6c0.6,0.4,1.2,1,1.7,1.7l2.9-0.7c-0.7-1.4-1.5-2.5-2.6-3.2c-1.1-0.7-2.4-1-4-1c-1.2,0-2.2,0.2-3.2,0.6
-		c-1,0.4-1.9,1-2.6,1.8c-0.8,0.8-1.3,1.8-1.8,2.9c-0.4,1.1-0.6,2.4-0.6,3.9c0,1.8,0.3,3.4,1,4.7C263,23.1,263.9,24.1,265.1,24.9z"/>
-	<rect x="280.8" y="8.1" class="st0" width="2.9" height="17.5"/>
-	<polygon class="st0" points="300,23.1 291.8,23.1 291.8,18.1 299.5,18.1 299.5,15.6 291.8,15.6 291.8,10.6 300,10.6 300,8.1 
-		288.9,8.1 288.9,25.6 300,25.6 	"/>
-	<path class="st0" d="M40.6,6.7H0v40.6h40.6V32.2H300v-1.2H40.6V6.7z M7.9,36.7H3.3c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7
-		h4.7c0.4,0,0.7,0.3,0.7,0.7C8.7,36.4,8.3,36.7,7.9,36.7z M7.9,32.2H3.3c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7h4.7
-		c0.4,0,0.7,0.3,0.7,0.7C8.7,31.9,8.3,32.2,7.9,32.2z M7.9,27.7H3.3c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7h4.7
-		c0.4,0,0.7,0.3,0.7,0.7C8.7,27.4,8.3,27.7,7.9,27.7z M7.9,23.3H3.3c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7h4.7
-		c0.4,0,0.7,0.3,0.7,0.7C8.7,22.9,8.3,23.3,7.9,23.3z M7.9,18.8H3.3c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7h4.7
-		c0.4,0,0.7,0.3,0.7,0.7C8.7,18.4,8.3,18.8,7.9,18.8z M12.1,43.5c0,0.4-0.3,0.7-0.7,0.7c-0.4,0-0.7-0.3-0.7-0.7v-4.7
-		c0-0.4,0.3-0.7,0.7-0.7c0.4,0,0.7,0.3,0.7,0.7V43.5z M12.1,15.2c0,0.4-0.3,0.7-0.7,0.7c-0.4,0-0.7-0.3-0.7-0.7v-4.7
-		c0-0.4,0.3-0.7,0.7-0.7c0.4,0,0.7,0.3,0.7,0.7V15.2z M16.6,43.5c0,0.4-0.3,0.7-0.7,0.7c-0.4,0-0.7-0.3-0.7-0.7v-4.7
-		c0-0.4,0.3-0.7,0.7-0.7c0.4,0,0.7,0.3,0.7,0.7V43.5z M16.6,15.2c0,0.4-0.3,0.7-0.7,0.7c-0.4,0-0.7-0.3-0.7-0.7v-4.7
-		c0-0.4,0.3-0.7,0.7-0.7c0.4,0,0.7,0.3,0.7,0.7V15.2z M21.1,43.5c0,0.4-0.3,0.7-0.7,0.7c-0.4,0-0.7-0.3-0.7-0.7v-4.7
-		c0-0.4,0.3-0.7,0.7-0.7c0.4,0,0.7,0.3,0.7,0.7V43.5z M21.1,15.2c0,0.4-0.3,0.7-0.7,0.7c-0.4,0-0.7-0.3-0.7-0.7v-4.7
-		c0-0.4,0.3-0.7,0.7-0.7c0.4,0,0.7,0.3,0.7,0.7V15.2z M25.5,43.5c0,0.4-0.3,0.7-0.7,0.7c-0.4,0-0.7-0.3-0.7-0.7v-4.7
-		c0-0.4,0.3-0.7,0.7-0.7c0.4,0,0.7,0.3,0.7,0.7V43.5z M25.5,15.2c0,0.4-0.3,0.7-0.7,0.7c-0.4,0-0.7-0.3-0.7-0.7v-4.7
-		c0-0.4,0.3-0.7,0.7-0.7c0.4,0,0.7,0.3,0.7,0.7V15.2z M30,43.5c0,0.4-0.3,0.7-0.7,0.7s-0.7-0.3-0.7-0.7v-4.7c0-0.4,0.3-0.7,0.7-0.7
-		s0.7,0.3,0.7,0.7V43.5z M30,15.2c0,0.4-0.3,0.7-0.7,0.7s-0.7-0.3-0.7-0.7v-4.7c0-0.4,0.3-0.7,0.7-0.7s0.7,0.3,0.7,0.7V15.2z
-		 M37.3,36.7h-4.7c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7h4.7c0.4,0,0.7,0.3,0.7,0.7C38.1,36.4,37.7,36.7,37.3,36.7z
-		 M37.3,32.2h-4.7c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7h4.7c0.4,0,0.7,0.3,0.7,0.7C38.1,31.9,37.7,32.2,37.3,32.2z
-		 M37.3,27.7h-4.7c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7h4.7c0.4,0,0.7,0.3,0.7,0.7C38.1,27.4,37.7,27.7,37.3,27.7z
-		 M37.3,23.3h-4.7c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7h4.7c0.4,0,0.7,0.3,0.7,0.7C38.1,22.9,37.7,23.3,37.3,23.3z
-		 M37.3,18.8h-4.7c-0.4,0-0.7-0.3-0.7-0.7c0-0.4,0.3-0.7,0.7-0.7h4.7c0.4,0,0.7,0.3,0.7,0.7C38.1,18.4,37.7,18.8,37.3,18.8z"/>
-	<path class="st0" d="M360.9,50.7v0.7c0.3,0,0.6-0.1,0.9-0.3v4.6h0.7v-5.3h-0.5C361.6,50.5,361.3,50.7,360.9,50.7z"/>
-	<rect x="341" y="52.9" class="st0" width="2.3" height="0.6"/>
-	<path class="st0" d="M332.1,50.4c-0.3-0.1-0.5-0.2-0.8-0.2c-0.6,0-1,0.1-1.3,0.4c-0.3,0.3-0.5,0.7-0.5,1.2c0,0.5,0.2,0.9,0.5,1.2
-		c0.3,0.3,0.7,0.5,1.1,0.5c0.4,0,0.8-0.1,1.1-0.3c0.3-0.2,0.4-0.6,0.5-1c0,0.2,0,0.4,0,0.6c0,1.1-0.3,1.9-0.8,2.2
-		c-0.2,0.1-0.4,0.2-0.7,0.2c-0.3,0-0.5-0.1-0.7-0.3c-0.2-0.2-0.3-0.4-0.3-0.8h-0.7c0,0.5,0.2,0.9,0.5,1.2c0.3,0.3,0.8,0.5,1.4,0.5
-		c0.3,0,0.6-0.1,0.9-0.2c0.8-0.4,1.2-1.3,1.2-2.7c0-0.8-0.2-1.4-0.6-1.9C332.6,50.7,332.3,50.5,332.1,50.4z M332,52.6
-		c-0.2,0.2-0.5,0.3-0.8,0.3s-0.6-0.1-0.8-0.3c-0.2-0.2-0.3-0.4-0.3-0.8c0-0.3,0.1-0.6,0.3-0.8c0.2-0.2,0.5-0.3,0.8-0.3
-		c0.3,0,0.6,0.1,0.8,0.3c0.2,0.2,0.3,0.4,0.3,0.7C332.3,52.2,332.2,52.4,332,52.6z"/>
-	<path class="st0" d="M347,54.2c0.1-0.1,0.3-0.3,0.6-0.4l1.1-0.4c0.4-0.2,0.7-0.4,0.9-0.6c0.2-0.3,0.3-0.6,0.3-1
-		c0-0.4-0.2-0.8-0.5-1.1c-0.3-0.3-0.8-0.4-1.3-0.4c-0.5,0-1,0.1-1.3,0.4c-0.3,0.2-0.5,0.6-0.6,1.1h0.7c0-0.3,0.2-0.5,0.4-0.6
-		c0.2-0.1,0.5-0.2,0.8-0.2c0.3,0,0.6,0.1,0.8,0.3c0.2,0.2,0.3,0.4,0.3,0.7c0,0.5-0.3,0.8-0.8,1.1l-1.1,0.4c-0.2,0.1-0.4,0.2-0.5,0.3
-		c-0.5,0.3-0.7,0.8-0.7,1.4v0.8h3.8V55h-3.1v-0.3C346.8,54.5,346.9,54.4,347,54.2z"/>
-	<path class="st0" d="M336.5,52.4c-0.4,0-0.8,0.1-1.1,0.4c-0.3,0.2-0.4,0.6-0.5,1.1c0-0.2,0-0.4,0-0.7c0-0.7,0.1-1.3,0.4-1.7
-		c0.3-0.4,0.7-0.6,1.2-0.6c0.5,0,0.8,0.3,0.9,0.8h0.7c0-0.4-0.2-0.8-0.5-1c-0.3-0.3-0.7-0.4-1.2-0.4c-0.7,0-1.2,0.3-1.6,0.8
-		c-0.4,0.5-0.6,1.2-0.6,2s0.2,1.5,0.6,2c0.4,0.5,0.9,0.8,1.5,0.8c0.5,0,1-0.2,1.3-0.5c0.3-0.3,0.5-0.7,0.5-1.2
-		c0-0.5-0.2-0.9-0.5-1.2C337.3,52.6,337,52.4,336.5,52.4z M337.1,54.9c-0.2,0.2-0.5,0.3-0.8,0.3s-0.6-0.1-0.8-0.3
-		c-0.2-0.2-0.3-0.4-0.3-0.7c0-0.3,0.1-0.6,0.3-0.8c0.2-0.2,0.5-0.3,0.8-0.3c0.3,0,0.6,0.1,0.8,0.3c0.2,0.2,0.3,0.4,0.3,0.8
-		C337.5,54.4,337.3,54.7,337.1,54.9z"/>
-	<path class="st0" d="M353.1,50.2c-0.6,0-1.2,0.2-1.5,0.7c-0.4,0.5-0.6,1.2-0.6,2.1c0,0.9,0.2,1.6,0.6,2.1c0.4,0.5,0.9,0.7,1.5,0.7
-		c0.6,0,1.2-0.2,1.5-0.7c0.4-0.5,0.6-1.2,0.6-2c0-0.9-0.2-1.6-0.6-2C354.2,50.5,353.7,50.2,353.1,50.2z M354.1,54.6
-		c-0.2,0.4-0.6,0.6-1,0.6c-0.5,0-0.8-0.2-1-0.6c-0.2-0.4-0.4-0.9-0.4-1.6c0-0.7,0.1-1.2,0.4-1.6c0.2-0.4,0.6-0.6,1-0.6
-		c0.5,0,0.8,0.2,1,0.6c0.2,0.4,0.4,0.9,0.4,1.6C354.5,53.7,354.3,54.2,354.1,54.6z"/>
-	<path class="st0" d="M327.1,50.4c-0.3-0.1-0.5-0.2-0.8-0.2c-0.6,0-1,0.1-1.3,0.4c-0.3,0.3-0.5,0.7-0.5,1.2c0,0.5,0.2,0.9,0.5,1.2
-		c0.3,0.3,0.7,0.5,1.1,0.5c0.4,0,0.8-0.1,1.1-0.3c0.3-0.2,0.4-0.6,0.5-1c0,0.2,0,0.4,0,0.6c0,1.1-0.3,1.9-0.8,2.2
-		c-0.2,0.1-0.4,0.2-0.7,0.2c-0.3,0-0.5-0.1-0.7-0.3c-0.2-0.2-0.3-0.4-0.3-0.8h-0.7c0,0.5,0.2,0.9,0.5,1.2c0.3,0.3,0.8,0.5,1.4,0.5
-		c0.3,0,0.6-0.1,0.9-0.2c0.8-0.4,1.2-1.3,1.2-2.7c0-0.8-0.2-1.4-0.6-1.9C327.6,50.7,327.4,50.5,327.1,50.4z M327.1,52.6
-		c-0.2,0.2-0.5,0.3-0.8,0.3c-0.3,0-0.6-0.1-0.8-0.3c-0.2-0.2-0.3-0.4-0.3-0.8c0-0.3,0.1-0.6,0.3-0.8c0.2-0.2,0.5-0.3,0.8-0.3
-		c0.3,0,0.6,0.1,0.8,0.3c0.2,0.2,0.3,0.4,0.3,0.7C327.4,52.2,327.3,52.4,327.1,52.6z"/>
-	<path class="st0" d="M321.5,50.7v0.7c0.3,0,0.6-0.1,0.9-0.3v4.6h0.7v-5.3h-0.5C322.3,50.5,321.9,50.7,321.5,50.7z"/>
-	<path class="st0" d="M357,54.2c0.1-0.1,0.3-0.3,0.6-0.4l1.1-0.4c0.4-0.2,0.7-0.4,0.9-0.6c0.2-0.3,0.3-0.6,0.3-1
-		c0-0.4-0.2-0.8-0.5-1.1c-0.3-0.3-0.8-0.4-1.3-0.4c-0.5,0-1,0.1-1.3,0.4c-0.3,0.2-0.5,0.6-0.6,1.1h0.7c0-0.3,0.2-0.5,0.4-0.6
-		c0.2-0.1,0.5-0.2,0.8-0.2c0.3,0,0.6,0.1,0.8,0.3c0.2,0.2,0.3,0.4,0.3,0.7c0,0.5-0.3,0.8-0.8,1.1l-1.1,0.4c-0.2,0.1-0.4,0.2-0.5,0.3
-		c-0.5,0.3-0.7,0.8-0.7,1.4v0.8h3.8V55h-3.1v-0.3C356.8,54.5,356.9,54.4,357,54.2z"/>
-	<rect x="350.4" y="41" class="st0" width="1" height="5.5"/>
-	<polygon class="st0" points="342.8,46.5 342.8,41 341.8,41 341.8,44.9 339.4,41 338.3,41 338.3,46.5 339.3,46.5 339.3,42.5 
-		341.8,46.5 	"/>
-	<polygon class="st0" points="348.9,46.5 348.9,41 347.9,41 347.9,44.9 345.4,41 344.4,41 344.4,46.5 345.4,46.5 345.4,42.5 
-		347.9,46.5 	"/>
-	<path class="st0" d="M336.3,46.5h1.1l-1.8-5.5h-1.3l-1.9,5.5h1.1l0.4-1.2h2L336.3,46.5z M334.1,44.6l0.8-2.4l0.8,2.4H334.1z"/>
-	<path class="st0" d="M373.5,33.6c-0.1-0.1-0.2-0.2-0.3-0.3c-0.1-0.1-0.2-0.2-0.3-0.4c-0.1-0.1-0.3-0.3-0.4-0.4c0,0-0.1-0.1-0.1-0.1
-		c0,0-0.1-0.1-0.1-0.1c-0.1-0.1-0.2-0.2-0.2-0.2c-0.1-0.1-0.2-0.2-0.3-0.2c0,0-0.1-0.1-0.1-0.1c0,0-0.1-0.1-0.1-0.1
-		c-0.2-0.2-0.4-0.3-0.6-0.5c-0.2-0.2-0.5-0.4-0.7-0.6c-0.1-0.1-0.2-0.2-0.4-0.3c-0.1,0-0.1-0.1-0.2-0.1c-0.1,0-0.1-0.1-0.2-0.1
-		c-1.1-0.8-2.4-1.5-3.9-2.2c-0.2-0.1-0.4-0.2-0.6-0.3c-0.1,0-0.2-0.1-0.3-0.1c-0.1,0-0.2-0.1-0.3-0.1c-0.2-0.1-0.4-0.2-0.6-0.2
-		c-0.2-0.1-0.4-0.1-0.6-0.2c-0.1,0-0.2-0.1-0.3-0.1c-0.1,0-0.2-0.1-0.3-0.1c-0.2-0.1-0.4-0.1-0.7-0.2l-0.1,0l-0.1,0
-		c-0.1,0-0.1,0-0.2,0c-0.1,0-0.2-0.1-0.3-0.1c-0.2-0.1-0.5-0.1-0.7-0.2c-0.2,0-0.5-0.1-0.7-0.1c-0.1,0-0.2,0-0.4-0.1
-		c-0.1,0-0.2,0-0.4-0.1c-0.5-0.1-1-0.1-1.5-0.2c-0.3,0-0.5,0-0.8-0.1c-0.1,0-0.3,0-0.4,0c0.1,0,0.1,0,0.2,0c1.1-1.6,1.8-3.5,1.8-5.7
-		c0-2.8-0.9-5.1-2.6-6.8c-1.7-1.8-3.9-2.7-6.5-2.7c-0.3,0-0.6,0-0.9,0.1c-0.3,0-0.6,0.1-1,0.2l1.2-5.2h9.4V0.2h-13.5l-2.1,9.7
-		c-0.2-0.7-0.5-1.4-0.9-2c-0.8-1.4-1.9-2.5-3.2-3.2c-1.3-0.7-2.9-1.1-4.7-1.1c-2.9,0-5.2,0.9-7,2.7c-1.8,1.8-2.8,4.3-2.9,7.4h5.4
-		c0.1-1.5,0.5-2.7,1.3-3.6c0.8-0.9,1.8-1.3,3-1.3c1.2,0,2.1,0.4,2.9,1.1c0.7,0.7,1.1,1.7,1.1,2.8c0,1.1-0.4,2.3-1.1,3.6
-		c-0.7,1.3-2.2,3.1-4.3,5.3l-9,9.1v2.6c-0.1,0-0.2,0-0.3,0c-0.8,0-1.6,0-2.4-0.1c-1.5-0.1-2.9-0.4-4.1-0.8c-0.6-0.2-1.2-0.4-1.7-0.5
-		c-0.1,0-0.3-0.1-0.4-0.1c-0.1,0-0.1,0-0.2-0.1c-0.1,0-0.1,0-0.2-0.1c-0.1,0-0.2-0.1-0.3-0.1c-0.1,0-0.2-0.1-0.3-0.1
-		c-0.1,0-0.2-0.1-0.3-0.1c-0.1,0-0.2-0.1-0.3-0.1c-0.2-0.1-0.4-0.2-0.5-0.3c-0.2-0.1-0.3-0.2-0.4-0.2c-0.1-0.1-0.3-0.1-0.4-0.2
-		c-0.2-0.1-0.4-0.2-0.5-0.3c-0.1-0.1-0.2-0.1-0.2-0.1c0,0,0.1,0.1,0.1,0.1c0,0,0.1,0.1,0.2,0.2c0,0,0.1,0.1,0.1,0.1
-		c0,0,0.1,0.1,0.1,0.1c0.1,0.1,0.2,0.2,0.3,0.3c0.1,0.1,0.2,0.2,0.4,0.3c0.1,0.1,0.3,0.2,0.4,0.4c0.1,0.1,0.2,0.1,0.3,0.2
-		c0.1,0.1,0.2,0.1,0.3,0.2c0.1,0.1,0.2,0.1,0.3,0.2c0.1,0.1,0.2,0.1,0.3,0.2c0.1,0,0.1,0.1,0.2,0.1c0.1,0,0.1,0.1,0.2,0.1
-		c0.1,0.1,0.2,0.2,0.4,0.2c0.1,0.1,0.2,0.2,0.4,0.2c0.1,0.1,0.3,0.2,0.4,0.2c0.1,0.1,0.3,0.2,0.4,0.2c0.1,0,0.1,0.1,0.2,0.1
-		c0.1,0,0.1,0.1,0.2,0.1c1.2,0.6,2.6,1.2,4.2,1.6c0.8,0.2,1.7,0.4,2.5,0.5c0.9,0.1,1.8,0.2,2.8,0.2c1.9,0.1,3.9-0.1,6-0.4
-		c2-0.3,4.1-0.8,6.2-1.5c2.1-0.6,4.1-1.4,6.1-2.3c0.1-0.1,0.2-0.1,0.4-0.2l0.3-0.2c0.2-0.1,0.5-0.2,0.7-0.3l0.1,0l0.1,0l0.2-0.1
-		l0.3-0.1l0.2-0.1c0.1,0,0.1,0,0.2-0.1l0.3-0.1c0.9-0.3,1.9-0.6,2.8-0.9c0.1,0,0.1,0,0.2,0l0.2,0c0.1,0,0.2-0.1,0.4-0.1
-		c0.2-0.1,0.5-0.1,0.7-0.2c0.1,0,0.2-0.1,0.4-0.1c0.1,0,0.1,0,0.2,0l0.2,0c0.1,0,0.2,0,0.4-0.1l0.2,0c0.1,0,0.1,0,0.2,0
-		c0.2,0,0.5-0.1,0.7-0.1c0.1,0,0.2,0,0.4,0c0.1,0,0.2,0,0.4,0c0.1,0,0.2,0,0.4,0c0.1,0,0.2,0,0.4,0c0.1,0,0.2,0,0.3,0
-		c0.1,0,0.2,0,0.3,0c0.9-0.1,1.8-0.1,2.7-0.1c0.2,0,0.4,0,0.7,0c0.1,0,0.1,0,0.2,0l0.1,0l0.1,0c0.1,0,0.2,0,0.3,0c0.1,0,0.2,0,0.3,0
-		c0.1,0,0.2,0,0.3,0c0.2,0,0.4,0,0.6,0.1c0.2,0,0.4,0,0.6,0.1c0.1,0,0.2,0,0.3,0c0.1,0,0.1,0,0.2,0l0.1,0l0.1,0
-		c0.2,0,0.4,0.1,0.6,0.1c0.1,0,0.2,0,0.3,0c0.1,0,0.2,0,0.3,0.1c0.2,0,0.4,0.1,0.6,0.1c0,0,0.1,0,0.1,0c0,0,0.1,0,0.1,0
-		c0.1,0,0.2,0,0.3,0.1c0.1,0,0.2,0,0.3,0.1c0.1,0,0.2,0,0.3,0.1c0.2,0.1,0.4,0.1,0.6,0.2c1.5,0.4,2.8,0.9,3.9,1.4
-		c0.1,0,0.1,0.1,0.2,0.1c0.1,0,0.1,0.1,0.2,0.1c0.1,0.1,0.3,0.1,0.4,0.2c0.1,0.1,0.3,0.1,0.4,0.2c0.1,0.1,0.3,0.1,0.4,0.2
-		c0.2,0.1,0.5,0.3,0.7,0.4c0.1,0,0.1,0.1,0.2,0.1c0.1,0,0.1,0.1,0.2,0.1c0.1,0.1,0.2,0.1,0.3,0.2c0.1,0.1,0.2,0.1,0.3,0.2
-		c0,0,0.1,0.1,0.1,0.1c0,0,0.1,0.1,0.1,0.1c0.2,0.1,0.3,0.2,0.5,0.3c0.2,0.1,0.3,0.2,0.4,0.3c0.1,0.1,0.2,0.2,0.3,0.2
-		c0.4,0.3,0.6,0.4,0.6,0.4C374,34.2,373.8,34,373.5,33.6z M335.8,24.8c2.6-2.7,4.4-5,5.4-7c0.2-0.4,0.4-0.9,0.6-1.3l3.6,0.8
-		c0.6-0.6,1.1-1,1.7-1.3c0.6-0.3,1.2-0.4,1.8-0.4c1.1,0,2.1,0.4,2.9,1.3c0.8,0.9,1.2,1.9,1.2,3.3c0,1.4-0.4,2.5-1.3,3.4
-		c-0.8,0.9-1.9,1.3-3.1,1.3c-0.9,0-1.7-0.2-2.4-0.7c-0.7-0.5-1.3-1.1-1.7-2h-5.7c0.5,2.4,1.7,4.3,3.5,5.7c0.2,0.1,0.3,0.2,0.5,0.4
-		c0,0,0,0,0,0c-0.2,0.1-0.3,0.1-0.5,0.2c0,0,0,0,0,0h-9.6L335.8,24.8z"/>
-</g>
-</svg>

RotaxMonitor/unpacked_fs/script.js

@@ -1,164 +0,0 @@
-let ws;
-let lastMessageTimestamp = 0;
-const IDLE_THRESHOLD_MS = 1000;
-const loadingIndicator = document.getElementById("loadingIndicator");
-
-function setLoadingIndicator(visible) {
-    if (!loadingIndicator) {
-        return;
-    }
-
-    loadingIndicator.classList.toggle("hidden", !visible);
-}
-
-function updateLoadingState() {
-    const isConnected = ws && ws.readyState === WebSocket.OPEN;
-    const idle = Date.now() - lastMessageTimestamp >= IDLE_THRESHOLD_MS;
-
-    setLoadingIndicator(isConnected && idle);
-}
-
-function connectWS() {
-    ws = new WebSocket("ws://" + location.host + "/ws");
-
-    ws.onopen = () => {
-        console.log("WebSocket connesso");
-        lastMessageTimestamp = Date.now();
-        setLoadingIndicator(false);
-    };
-
-    ws.onclose = () => {
-        console.log("WebSocket disconnesso, retry...");
-        setLoadingIndicator(false);
-        setTimeout(connectWS, 5000);
-    };
-
-    ws.onmessage = (event) => {
-        let data;
-
-        try {
-            data = JSON.parse(event.data);
-        } catch (e) {
-            console.error("Invalid JSON received", e);
-            return;
-        }
-
-        lastMessageTimestamp = Date.now();
-        setLoadingIndicator(false);
-
-        // Update Box_A
-        if (data.box_a) {
-            const boxA = data.box_a;
-            document.getElementById("a_datavalid").textContent = boxA.datavalid ?? "-";
-            document.getElementById("a_timestamp").textContent = boxA.timestamp ?? "-";
-            document.getElementById("a_volts_gen").textContent = boxA.volts_gen ?? "-";
-            document.getElementById("a_eng_rpm").textContent = boxA.eng_rpm ?? "-";
-            document.getElementById("a_adc_read_time").textContent = boxA.adc_read_time ?? "-";
-            document.getElementById("a_n_queue_errors").textContent = boxA.n_queue_errors ?? "-";
-
-            const coils12A = boxA.coils12 || {};
-            const coils34A = boxA.coils34 || {};
-
-            document.getElementById("a_coils12_spark_delay").textContent = coils12A.spark_delay ?? "-";
-            document.getElementById("a_coils34_spark_delay").textContent = coils34A.spark_delay ?? "-";
-            document.getElementById("a_coils12_spark_status").textContent = coils12A.spark_status ?? "-";
-            document.getElementById("a_coils34_spark_status").textContent = coils34A.spark_status ?? "-";
-            document.getElementById("a_coils12_sstart_status").textContent = coils12A.sstart_status ?? "-";
-            document.getElementById("a_coils34_sstart_status").textContent = coils34A.sstart_status ?? "-";
-            document.getElementById("a_coils12_peak_p_in").textContent = coils12A.peak_p_in ?? "-";
-            document.getElementById("a_coils34_peak_p_in").textContent = coils34A.peak_p_in ?? "-";
-            document.getElementById("a_coils12_peak_n_in").textContent = coils12A.peak_n_in ?? "-";
-            document.getElementById("a_coils34_peak_n_in").textContent = coils34A.peak_n_in ?? "-";
-            document.getElementById("a_coils12_peak_p_out").textContent = coils12A.peak_p_out ?? "-";
-            document.getElementById("a_coils34_peak_p_out").textContent = coils34A.peak_p_out ?? "-";
-            document.getElementById("a_coils12_peak_n_out").textContent = coils12A.peak_n_out ?? "-";
-            document.getElementById("a_coils34_peak_n_out").textContent = coils34A.peak_n_out ?? "-";
-            document.getElementById("a_coils12_level_spark").textContent = coils12A.level_spark ?? "-";
-            document.getElementById("a_coils34_level_spark").textContent = coils34A.level_spark ?? "-";
-            document.getElementById("a_coils12_n_events").textContent = coils12A.n_events ?? "-";
-            document.getElementById("a_coils34_n_events").textContent = coils34A.n_events ?? "-";
-            document.getElementById("a_coils12_n_missed_firing").textContent = coils12A.n_missed_firing ?? "-";
-            document.getElementById("a_coils34_n_missed_firing").textContent = coils34A.n_missed_firing ?? "-";
-        }
-
-        // Update Box_B
-        if (data.box_b) {
-            const boxB = data.box_b;
-            document.getElementById("b_datavalid").textContent = boxB.datavalid ?? "-";
-            document.getElementById("b_timestamp").textContent = boxB.timestamp ?? "-";
-            document.getElementById("b_volts_gen").textContent = boxB.volts_gen ?? "-";
-            document.getElementById("b_eng_rpm").textContent = boxB.eng_rpm ?? "-";
-            document.getElementById("b_adc_read_time").textContent = boxB.adc_read_time ?? "-";
-            document.getElementById("b_n_queue_errors").textContent = boxB.n_queue_errors ?? "-";
-
-            const coils12B = boxB.coils12 || {};
-            const coils34B = boxB.coils34 || {};
-
-            document.getElementById("b_coils12_spark_delay").textContent = coils12B.spark_delay ?? "-";
-            document.getElementById("b_coils34_spark_delay").textContent = coils34B.spark_delay ?? "-";
-            document.getElementById("b_coils12_spark_status").textContent = coils12B.spark_status ?? "-";
-            document.getElementById("b_coils34_spark_status").textContent = coils34B.spark_status ?? "-";
-            document.getElementById("b_coils12_sstart_status").textContent = coils12B.sstart_status ?? "-";
-            document.getElementById("b_coils34_sstart_status").textContent = coils34B.sstart_status ?? "-";
-            document.getElementById("b_coils12_peak_p_in").textContent = coils12B.peak_p_in ?? "-";
-            document.getElementById("b_coils34_peak_p_in").textContent = coils34B.peak_p_in ?? "-";
-            document.getElementById("b_coils12_peak_n_in").textContent = coils12B.peak_n_in ?? "-";
-            document.getElementById("b_coils34_peak_n_in").textContent = coils34B.peak_n_in ?? "-";
-            document.getElementById("b_coils12_peak_p_out").textContent = coils12B.peak_p_out ?? "-";
-            document.getElementById("b_coils34_peak_p_out").textContent = coils34B.peak_p_out ?? "-";
-            document.getElementById("b_coils12_peak_n_out").textContent = coils12B.peak_n_out ?? "-";
-            document.getElementById("b_coils34_peak_n_out").textContent = coils34B.peak_n_out ?? "-";
-            document.getElementById("b_coils12_level_spark").textContent = coils12B.level_spark ?? "-";
-            document.getElementById("b_coils34_level_spark").textContent = coils34B.level_spark ?? "-";
-            document.getElementById("b_coils12_n_events").textContent = coils12B.n_events ?? "-";
-            document.getElementById("b_coils34_n_events").textContent = coils34B.n_events ?? "-";
-            document.getElementById("b_coils12_n_missed_firing").textContent = coils12B.n_missed_firing ?? "-";
-            document.getElementById("b_coils34_n_missed_firing").textContent = coils34B.n_missed_firing ?? "-";
-        }
-    };
-}
-
-function start() {
-    fetch("/start");
-}
-
-function stop() {
-    fetch("/stop");
-}
-
-function uploadLittleFS() {
-    const fileInput = document.getElementById("littlefsFile");
-    const status = document.getElementById("uploadStatus");
-
-    if (!fileInput || fileInput.files.length === 0) {
-        if (status) status.textContent = "Select a file first.";
-        return;
-    }
-
-    const file = fileInput.files[0];
-    const formData = new FormData();
-    formData.append("file", file, file.name);
-
-    if (status) status.textContent = "Uploading...";
-
-    fetch("/upload", {
-        method: "POST",
-        body: formData,
-    })
-        .then((resp) => {
-            if (!resp.ok) {
-                throw new Error("Upload failed: " + resp.status + " " + resp.statusText);
-            }
-            return resp.text();
-        })
-        .then(() => {
-            if (status) status.textContent = "Uploaded: " + file.name;
-            fileInput.value = "";
-        })
-        .catch((err) => {
-            if (status) status.textContent = err.message;
-        });
-}
-
-setInterval(updateLoadingState, 200);
-connectWS();

RotaxMonitor/unpacked_fs/style.css

@@ -1,221 +0,0 @@
-:root {
-    --primary-dark: #0a1929;
-    --primary-blue: #003585;
-    --accent-blue: #1e88e5;
-    --light-bg: #f5f7fa;
-    --border-color: #d0d6dd;
-    --text-dark: #1a1a1a;
-    --text-muted: #666666;
-}
-
-body {
-    font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, 'Helvetica Neue', Arial, sans-serif;
-    margin: 0;
-    padding: 0;
-    background-color: var(--light-bg);
-    color: var(--text-dark);
-}
-
-.page-header {
-    background: linear-gradient(135deg, var(--primary-dark) 0%, #1a3a52 100%);
-    color: white;
-    padding: 30px 20px;
-    box-shadow: 0 2px 8px rgba(0, 0, 0, 0.1);
-    margin-bottom: 30px;
-}
-
-.header-content {
-    max-width: 900px;
-    margin: 0 auto;
-    display: flex;
-    align-items: center;
-    gap: 20px;
-}
-
-.logo {
-    height: 50px;
-    width: auto;
-    margin: auto;
-}
-
-.page-header h1 {
-    margin: auto;
-    margin-top: 20px;
-    text-align: center;
-    font-size: 28px;
-    font-weight: 600;
-}
-
-table {
-    margin: auto;
-    border-collapse: collapse;
-    width: 100%;
-    max-width: 900px;
-    background: white;
-    box-shadow: 0 1px 3px rgba(0, 0, 0, 0.08);
-    border-radius: 6px;
-    overflow: hidden;
-}
-
-th, td {
-    border: 1px solid var(--border-color);
-    padding: 12px;
-    font-size: 14px;
-    text-align: center;
-}
-
-th {
-    background-color: var(--primary-blue);
-    color: white;
-    font-weight: 600;
-}
-
-tr:hover {
-    background-color: #f9fbfc;
-}
-
-button {
-    margin: 10px;
-    padding: 10px 20px;
-    font-size: 16px;
-    background-color: var(--primary-blue);
-    color: white;
-    border: none;
-    border-radius: 4px;
-    cursor: pointer;
-    transition: background-color 0.2s;
-}
-
-button:hover {
-    background-color: var(--accent-blue);
-}
-
-.upload-section {
-    margin: 30px auto 20px;
-    max-width: 900px;
-    text-align: left;
-    padding: 20px;
-    border: 1px solid var(--border-color);
-    border-radius: 6px;
-    background: white;
-    box-shadow: 0 1px 3px rgba(0, 0, 0, 0.08);
-}
-
-.upload-section h3 {
-    margin-top: 0;
-    margin-bottom: 8px;
-    color: var(--primary-blue);
-    font-size: 16px;
-}
-
-.upload-section p {
-    margin: 8px 0;
-    color: var(--text-muted);
-    font-size: 14px;
-}
-
-.upload-section input[type="file"] {
-    margin-top: 8px;
-    margin-bottom: 12px;
-}
-
-.upload-status {
-    margin-top: 10px;
-    font-size: 14px;
-    color: var(--text-muted);
-}
-
-.loading-indicator {
-    display: flex;
-    align-items: center;
-    justify-content: center;
-    gap: 8px;
-    margin: 0;
-    padding: 16px 20px;
-    font-size: 20px;
-    color: var(--primary-blue);
-    border-bottom: 1px solid var(--border-color);
-    background: white;
-    width: 100%;
-    box-shadow: 0 1px 3px rgba(0, 0, 0, 0.08);
-}
-
-.loading-indicator.hidden {
-    display: none;
-}
-
-.spinner {
-    width: 16px;
-    height: 16px;
-    border: 2px solid transparent;
-    border-top-color: var(--primary-blue);
-    border-radius: 50%;
-    animation: spin 0.8s linear infinite;
-}
-
-@keyframes spin {
-    from {
-        transform: rotate(0deg);
-    }
-    to {
-        transform: rotate(360deg);
-    }
-}
-
-.tables-container {
-    display: flex;
-    gap: 20px;
-    max-width: 1800px;
-    margin: 0 auto;
-    padding: 0 20px;
-}
-
-.box {
-    flex: 1;
-    background: white;
-    padding: 20px;
-    border-radius: 6px;
-    box-shadow: 0 1px 3px rgba(0, 0, 0, 0.08);
-}
-
-.box h2 {
-    margin-top: 0;
-    margin-bottom: 16px;
-    color: var(--primary-blue);
-    font-size: 18px;
-    font-weight: 700;
-    text-align: center;
-}
-
-.box-data {
-    margin-bottom: 20px;
-}
-
-.box-data p {
-    margin: 8px 0;
-    font-size: 14px;
-}
-
-.box-data strong {
-    color: var(--primary-blue);
-}
-
-.rpm-highlight {
-    background: #c6e4fa;
-    border: 3px double var(--primary-blue);
-    border-radius: 8px;
-    padding: 12px 16px;
-    margin-bottom: 20px;
-    text-align: center;
-    font-size: 18px;
-    font-weight: bold;
-    color: var(--text-dark);
-}
-
-.rpm-highlight strong {
-    color: var(--primary-blue);
-}
-
-span {
-    color: var(--text-dark);
-}