re enable interrupt logic for ADC drdy

RotaxMonitor/lib/ADS1256/ADS1256.cpp

@@ -11,6 +11,8 @@
  RadoMmm for suggesting an improvement on the ADC-to-Volts conversion
 */
 
+#define DEBUGLOG_DEFAULT_LOG_LEVEL_DEBUG
+
 #include "Arduino.h"
 #include "ADS1256.h"
 #include "SPI.h"
@@ -62,16 +64,16 @@ ADS1256::ADS1256(const int8_t DRDY_pin, const int8_t RESET_pin, const int8_t SYN
 
 	updateConversionParameter();
 
-	// m_drdyHigh = xSemaphoreCreateBinary();
-	// m_drdyLow = xSemaphoreCreateBinary();
-	// if (!m_drdyHigh || !m_drdyLow) {
-	// 	LOG_ERROR("ADC Unable to create interrupt semaphores");
-	// 	return;
-	// }
+	m_drdyHigh = xSemaphoreCreateBinary();
+	m_drdyLow = xSemaphoreCreateBinary();
+	if (!m_drdyHigh || !m_drdyLow) {
+		LOG_ERROR("ADC Unable to create interrupt semaphores");
+		return;
+	}
 	
-	// xSemaphoreGive(m_drdyHigh);
-	// xSemaphoreGive(m_drdyLow);
-	//attachInterruptArg(DRDY_pin, drdyCallback, (void *)this, CHANGE);
+	xSemaphoreGive(m_drdyHigh);
+	xSemaphoreGive(m_drdyLow);
+	attachInterruptArg(DRDY_pin, drdyCallback, (void *)this, CHANGE);
 }
 
 // Initialization
@@ -125,16 +127,16 @@ void ADS1256::InitializeADC()
 
 void ADS1256::waitForLowDRDY()
 {
-	while(digitalRead(m_DRDY_pin) == HIGH) {vTaskDelay(1);};
-	// xSemaphoreTake(m_drdyLow, pdMS_TO_TICKS(10));
-	// xSemaphoreGive(m_drdyLow);
+	// while(digitalRead(m_DRDY_pin) == HIGH) {vTaskDelay(1);};
+	xSemaphoreTake(m_drdyLow, pdMS_TO_TICKS(10));
+	xSemaphoreGive(m_drdyLow);
 }
 
 void ADS1256::waitForHighDRDY()
 {
-	while(digitalRead(m_DRDY_pin) == LOW) {vTaskDelay(1);};
-	// xSemaphoreTake(m_drdyHigh, pdMS_TO_TICKS(10));
-	// xSemaphoreGive(m_drdyHigh);
+	// while(digitalRead(m_DRDY_pin) == LOW) {vTaskDelay(1);};
+	xSemaphoreTake(m_drdyHigh, pdMS_TO_TICKS(10));
+	xSemaphoreGive(m_drdyHigh);
 }
 
 void ADS1256::stopConversion() // Sending SDATAC to stop the continuous conversion

RotaxMonitor/platformio.ini

@@ -21,9 +21,9 @@ lib_deps =
 	me-no-dev/AsyncTCP@^3.3.2
 	me-no-dev/ESPAsyncWebServer@^3.6.0
 upload_protocol = esptool
-upload_port = /dev/ttyACM1
+upload_port = /dev/ttyACM0
 upload_speed = 921600
-monitor_port = /dev/ttyACM0
+monitor_port = /dev/ttyACM1
 monitor_speed = 921600
 build_type = release
 build_flags = 
@@ -45,9 +45,9 @@ framework = ${env:esp32-s3-devkitc1-n16r8.framework}
 lib_deps = 
 	${env:esp32-s3-devkitc1-n16r8.lib_deps}
 upload_protocol = esptool
-upload_port = /dev/ttyACM1
+upload_port = /dev/ttyACM0
 upload_speed = 921600
-monitor_port = /dev/ttyACM0
+monitor_port = /dev/ttyACM1
 monitor_speed = 921600
 debug_tool = esp-builtin
 debug_speed = 15000