mirror of
https://gitlab.com/obbart/universal_robots_ros_driver.git
synced 2026-04-10 01:50:46 +02:00
48 lines
2.8 KiB
Markdown
48 lines
2.8 KiB
Markdown
# ur_rtde_driver
|
|
|
|
This package contains the actual driver for UR robots. It is part of the *universal_robots_driver*
|
|
repository and requires other packages from that repository. Also, see the [main repository's
|
|
README](../README.md) for information on how to install and startup this driver.
|
|
|
|
## Technical details
|
|
The following image shows a very coarse overview of the driver's architecture.
|
|
|
|
|
|
|
|
Upon connection to the primary interface the robot sends version and calibration information which
|
|
is consumed by the *calibration_check*. If the calibration reported by the robot doesn't match the
|
|
one configured (See TODO: Insert Link) an error will be printed to Roslog.
|
|
|
|
Real-time data from the robot is read through the RTDE interface. This is done automatically as soon
|
|
as a connection to the robot could be established. Thus joint states and IO data will be immediately
|
|
available.
|
|
|
|
To actually control the robot, a program node from the **External Control** URCap must be running on
|
|
the robot interpreting commands sent from an external source. When this program is not running, no
|
|
controllers moving the robot around will be available. Please see the [initial setup
|
|
guide](../README.md) on how to install and start this on the robot.
|
|
|
|
The URScript that will be running on the robot is requested by the **External Control** program node
|
|
from the remote ROS PC. The robot *ur_control.launch* file has a parameter called `urscript_file` to
|
|
select a different program than the default one that will be sent as a response to a program
|
|
request.
|
|
|
|
**Custom script snippets** can be sent to the robot on a topic basis. By default, they will
|
|
interrupt other programs (such as the one controlling the robot). For a certain subset of functions,
|
|
it is however possible to send them as secondary programs. See [UR
|
|
documentation](https://www.universal-robots.com/how-tos-and-faqs/how-to/ur-how-tos/secondary-program-17257/)
|
|
on details.
|
|
<br/>
|
|
**Note to e-Series users:**
|
|
The robot won't accept script code from a remote source unless the robot is put into
|
|
*remote_control-mode*. However, if put into *remote_control-mode*, the program containing the
|
|
**External Control** program node can't be started from the panel. In the future, this will be
|
|
supported in the *headless* mode which doesn't require a panel being connected. Until that, a
|
|
possible workaround is to use a third party dashboard client (e.g. [ur_dash](https://github.com/gocarter/ur_dash))
|
|
to start the program through the dashboard server.
|
|
|
|
For using the **tool communication interface** on e-Series robots, a `socat` script is prepared to
|
|
forward the robot's tool communication interface to a local device on the ROS PC. See [the tool
|
|
communication setup guide](doc/setup_tool_communication.md) for details.
|
|
|